Accessoires voor elektrische apparatuur voor buitengebruik (3.246)

Maximum machine protection for hot water high-pressure cleaners with system care adaptation.

Schoonmaker, vloeibaar, fles, 1 l, machineklaar

Fan jet nozzle for large-area coverage and stubborn dirt and stains.

Flat jet nozzle for stubborn dirt.

Minimale interne vermogensverliezen en maximale stralingskwaliteit kenmerken de nieuwe performance-dirkfrees (spuitdopgrootte 040) - en maken een tot 50 procent hoger reinigings- en...

Hoogwaardige, hekwaterbestendige oppervlaktereiniger met roestvrijstalen behuizing. 2-voudige keramische klem, niet-registratie zwenkwielen, geïntegreerde zuigslang-aansluiting voor afzuiging van het...

The stainless steel FRV 30 Me Surface Cleaner makes possible cleaning with hot water up to 85°C. Thanks to the integrated automatic suction of the dirty water, the FRV 30 Me makes surface cleaning more efficient in both inside and outside areas. The FRV 30 Me is equipped with a temperature-resistant 7.5 m long suction hose made from polyurethane. Additional quality features of the high-performance surface cleaner are the non-marking steering rollers and double ceramic bearing. Technical data: Max. 250 bar, 1300 l/h. (Please order machine-specific nozzle kit separately.)

With integrated and automatic suction of dirty water, the FRV 30 EASY!Lock makes surface cleaning more efficient. No rinsing with clean water is required, as the dirty water is removed via a 5 m suction hose. Optional accessories include wheels that ensure the FRV 30 EASY!Lock does not scratch surfaces. The nozzle kit must be ordered separately.

Driven by water stream. Gently removes fine dust and traffic film from any surface. Temperature resistant up to 60°C, M 18 x 1.5 (replaceable brush insert).

30 m flexible high-pressure hose (DN 6) for pipe cleaning up to 220 bar (threaded connection for R 1/8 nozzle).

10 m flexible high-pressure hose (DN 6) for cleaning pipes (threaded connection for R 1/8 nozzle).

Drietandnozzle met handmatige nozzle-wisseling. Handige spuitaanpassing. Voor hogedrukreinigers met injector, lagedrukventilatorstraal voor het verwijderen en aanbrengen van reinigingsmiddelen.

Het instapmodel van de Kärcher-oppervlaktereiniger voor de spatwaterdichte reiniging van oppervlakken binnen en buiten. Waterdruk: Max. 150 bar temperatuur: Max. 40 °C waterhoeveelheid:...

High-pressure hose (DN 6) equipped with ANTI!Twist and the new EASY!Lock manual screw fitting on both sides. For pressures up to 300 bar. 10 m long.

Spray lance, 400 mm, rotating, ergonomic

Fan jet nozzle for large-area coverage and stubborn dirt and stains.

Appliance-dependent detergent injector for dosing cleaning agents at high and low pressure. The maximum dosing rate is approximately 15%.

Hose reel attachment kit for installation on the machine, incl. connection hose for the machine HP outlet. Rotatable under pressure with EASY!Lock connection.Hose reel kit for mounting on unit. The perfect solution for safe and space-saving high-pressure hose storage. Connects to high-pressure cleaner. Also rotates under pressure. Connector: 22 x 1.5.

Comfortable length (30 m) and innovative EASY!Lock manual screw fitting: High-pressure hose (DN 8) with ANTI!Twist for pressures up to 315 bar.

Newly developed, extremely robust Basic 2 foam lance specially designed for high-pressure cleaners with a flow rate of 700-800 l/h. Delivers excellent foam quality while using only half the amount of detergent. High-quality workmanship and the use of robust components, such as a brass base, guarantee a long service life for our newly developed Basic 2 foam lance. The unit is designed for high-pressure cleaners with a flow rate of 700 to 800 liters per hour that do not feature our servo control function, and it impresses with outstanding foam quality. At the same time, detergent consumption is reduced by around half when using our RM 838 VehiclePro foam cleaner. An integrated plate enables precise three-stage adjustment of the dosing and prevents accidental changes. In addition, the stable, robust, and ergonomic detergent container is very easy to fill thanks to its large opening and can be replaced quickly.

Pumpehastighed (l/h): 900 - 2500 Dysestørrelse ( ): 38 Maksimalt tryk (bar): 300 Dossering (%): 1 - 2 - 4 Tankvolumen (l): 1 Temperatur (°C): max. 60 Tilslutningsgevind: EASY!Lock Vægt inkl. emballage (kg): 0,8

Rotating wash brush attachment, voor hogedrukreiniger, voor Kärcher WB 120

Rotating wash brush attachment, voor hogedrukreiniger, voor Kärcher WB 120

EASY!Force-techniek gebruiken, maar de reeds aanwezige Kärcher hogedrukreiniger behouden: EASY!Force-conversiekit 2 met alle passende onderdelen tot aan de zuigmond. De conversiekit bevat het...

The forward-facing rotating pencil jet removes even the most stubborn dirt. The three rear-facing jets ensure the necessary forward propulsion as well as comfortable handling.

De extra scherpe stalen messen zorgen met de 36-46 Battery accu-grasmaaier voor een breed pad van zuiver gesneden gras: 46 cm in de breedte met een variabele snijhoogte en geen rafelige grassprieten....

High-pressure joint: Thanks to the stepless angle adjustment of up to 120°, this tool is ideal for effortless cleaning of hard-to-reach areas. It attaches easily to the pressure washer’s spray lance.

Suitable for our chain saw CS 400/36 Bp: Saw chain (40 cm) from Oregon. Durable and accurate quality, low vibrations and resilient. 1.3 mm chain link thickness, saw chain pitch 3/8

iSolar 400 water-driven brush, 700-1000 l/h. This water-driven disc brush with a working width of 400 mm cleans small to medium-sized photovoltaic systems. It can also be used on elevated installations. The iSolar 400 water-driven disc brush is designed for high-pressure cleaners with a water flow rate between 700 and 1,000 l/h. The brush has a working width of 400 mm and is particularly suitable for cleaning small to medium-sized solar panel systems. Thanks to its light weight and easy handling, even elevated installations can be cleaned comfortably.

Comfortable and universal carrying frame for reducing the required holding force when working with telescopic lances, garden tools and high-pressure lances

Developed for Kärcher high-pressure cleaners without servo control: The cup foam lance Advanced 2 impresses with a main body made of Ecobrass for use with aggressive cleaning agents.

Perfect for window, facade and solar panel cleaning with brushes and osmosis water, up to 7 m long telescopic lance TL 7 F made from glass fibre. Practical quick-release fasteners make possible comfortable retraction and extension, the clamping force can be individually set and adjusted effortlessly and without tools. A rotatable base ensures very simple and ergonomic working - if required, a carrying strap can be attached directly to the base.

Multifunctional hybrid telescopic lance TL 7 H made of rigid and lightweight carbon-glass fibre mix. Telescopic thanks to quick-release fastenings. Up to 7 m reach.

Up to 10 m reach: hybrid telescopic lance TL 10 H. Comprising carbon-glass fibre mix and suitable for multifunctional use. Simple retraction and extension thanks to quick-release fasteners.

Up to 180° variable angle joint for connecting telescopic lances and brushes when cleaning facades, windows, or solar panels.

Thanks to its flexible angle, the Vario joint for Kärcher telescopic lances enables more efficient and thorough cleaning of solar panels with the Roller Brush 500 and is far more comfortable for the user. The roller brush can be easily guided left and right with a simple twist of the telescopic lance. In this way, the brush automatically moves in the desired direction and significantly reduces user effort. Complete cleaning of solar panel areas close to the edges is also possible without any issues, as the brush can be guided over the panel edges with a simple tilt, allowing all areas to be reached. In addition, the combination of telescopic lance, Vario joint, and Roller Brush 500 is also ideal for cleaning, for example, glass facades or conservatories.