Handboormachines (2.114)

Bosch Bit extra-hard

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality, and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 E6.3, 1/4 external hexagon

Schroevendraaier bit, voor roestvrij staal, zachthout, 3 stuks, 1/4, torx, T20, hexagonaal, lengte: 25 mm

Core cutter, for concrete, masonry, SDS-plus, length: 175 mm

Boorhamerboor (SDS plus) met 6 mm diameter, 100 mm werklengte en 160 mm totale lengte, ontworpen voor boren in steen, metselwerk, graniet, beton en gewapend beton. Hammer drill bit SDS plus is een SDS plus boorhamerboor voor schoon, gecontroleerd boren in gangbare minerale bouwmaterialen, met duidelijk gespecificeerde diameter en lengtes voor betrouwbare passing en bereik.

Diameter mm: 10.0Shaft diameter mm: 8Total length mm: 90 Wood|SoftwoodWood|Acoustic panels

Diameter mm 20.0 Shaft diameter mm Total length mm 90

Diameter mm: 35.0Shaft diameter mm: 10Total length mm: 90 Wood|Hardwood/solid woodWood|SoftwoodWood|Acoustic panels

Universele borenset bevat 4 Bosch-boren in 4.0x75, 5.0x85, 6.0x100 en 8.0x120 voor veelzijdig boren in steen, metselwerk, tegels, hout, staal/ijzer en beton, inclusief gewapend beton. Bosch 4-piece Universal drill bit set is ontworpen om een breed scala aan materialen aan te kunnen—van fijn steengoed en dakpannen tot akoestische panelen en wapeningsstaal—en is daarmee een praktische set voor gemengde boortaken.

This Bosch hood is designed for polishing and is compatible with all drills.

Schroefbit met T-schroefkop, maat 25, en 25 mm lengte voor compatibele schroefwerkzaamheden. Standaard T schroefbit is gespecificeerd met een T (Torx) schroefkop, schroefkopmaat 25 en 25 mm lengte, waardoor het eenvoudig is de bit af te stemmen op de vereiste schroefkop en toepassing.

This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. This robust and compact set has a transparent storage box that provides a good overview of the contents as well as secure storage and transport. It has an external hexagonal shaft of 1/4 inch and is designed for universal mounting of screws with screwdrivers and power drills. Robust Line bit set Sx extra hard with 8 pieces Bit length 49 mm, ISO 1173 E6.3, without universal holder

Bosch

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers. Package with 10 pieces.

Bosch SDS-Quick Concrete Drill Bit

Bosch 2609256905 1 pc(s)

Bosch 2 609 256 914 drill bit 1 pc(s)

The holder-mounted countersink drill, countersinks and edge mills effectively in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Comes with hex key, dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

The holder-mounted countersink drill, countersinks and edge mills efficiently in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Supplied with hex key, dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

Drill bit, twist bit, 8.5 mm, cylindrical, length: 117 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers. Package with one piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers. Package with one piece.

Doosboor, voor beton, metselwerk, kalksteen, 45 mm, SDS-max

The SDS max-9 Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders. Package of 1 piece.

Bosch

Hij is compatibel met boorhamers met het SDS-Max-systeem. De SDS MAX-4 boor is voorzien van een kop met 4 snijkanten en biedt een lange levensduur in beton. Dit speciale design met 4 snijkanten...

Hij is compatibel met boorhamers met het SDS-Max-systeem. De SDS MAX-4 boor is voorzien van een kop met 4 snijkanten en biedt een lange levensduur in beton. Dit speciale design met 4 snijkanten...

Bosch Extra Hard-schroefbits

Spaakwielborstel, voor metaal, 30 stuks, 100 mm

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel. 9 steps Ø 4-5-6-7-8-9-10-11-12 mm

Metaalboorset van Bosch met 25 stuks voor metaalboorwerkzaamheden. Bosch HSS-R set met metaalboren 25 stuks is een 25-delige Bosch-set ontworpen voor werken met metaal, geleverd als een complete selectie metaalboren in één set.

Bosch 2 607 017 163 boor 4 stuk(s)

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel. 9 steps Ø 4-5-6-7-8-9-10-11-12 mm

Boor, voor beton, metselwerk, steen, 8 mm, cilindrisch, lengte: 150 mm

The Q-Lock adapter with hex holder allows the use of hole saws for power tools with a mandrel. It creates the necessary connection between the hole saw and power tool during cutting. The Q-Lock adapter is a keyless system that is unique in the market for standard hole saws. The adapter can be used with both powered and battery-operated screwdrivers. Hex adapter for 1/2 and 5/8 threads with HSS-G centering drill (1/4 holder) Key diameter 9.5 mm, for Ø 14 mm, 9/16 - Ø 210 mm, 8 9/32 (in metal up to Ø152 mm)

Deze extra harde schroefbit is een goede keuze voor algemene werkzaamheden. S2-gemodificeerd staal en een geoptimaliseerd warmtebehandelingsproces bieden een bovengemiddelde hardheid voor goede...