Handboormachines (10.000)

Bosch Betonboren SDS-Quick

Diameter mm x length mm: 5.5x100, 6.0x100, 7.0x100 Concrete|Concrete Stone|Natural Stone|Masonry Concrete|Reinforced concrete

Bosch SDS-Quick Multi-purpose Drill Bit

Bosch SDS-Quick Multi-purpose Drill Bit

Bosch 2 609 256 912 drill bit 1 pc(s)

Bosch SDS-Quick Multi-purpose Drill Bit

Bosch 2 609 256 914 drill bit 1 pc(s)

Bosch SDS-Quick multi-purpose drill bits

Bosch SDS-Quick multi-purpose drill bits

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 465 mm

Boor, 16 mm, SDS-plus, lengte: 265 mm

Boorstift, voor beton, metselwerk, versterkt beton, 10 stuks, 8 mm, SDS-plus, lengte: 165 mm

Boorstift, voor beton, metselwerk, versterkt beton, 10 stuks, 10 mm, SDS-plus, lengte: 165 mm

Boormachine GBM 6 RE, het snelle en precieze toestel met zeer hoog toerental (onbelast toerental: 4000 omw/min) voor kleine boordiameters, bevestiging van de boorspil in het lager voor hoge precisie,...

Bosch Professional GBM 10 RE Drill, Nominal input power: 600 W, Drill Ø, wood: 25 mm Includes: Self-tightening drill chuck 1 - 10 mm (spare part number 2 609 110 750)

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood Total length 160 mm

The drill bit has a hexagonal shank system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the drill bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the drill bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the drill bit and precision-ground main cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood Total length 160 mm

Boor, voor hout, slangenboor, 18 mm, zeskantig, lengte: 600 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood Total length 600 mm

Bosch Professional GSB 21-2 RCT Hammer Drill, Nominal Input Power: 1,300 W, Drill Ø in Masonry: 24/16 mm, Drill Ø in Wood: 40/25 mm Includes: Auxiliary Handle (2 602 025 193), Tool Case (2 605 438 ??524), Depth Stop of ??210 mm (1 ??613 ??001 ??010), Self-tightening Chuck,13mm (2??608??572??150)

The holder-mounted countersink drill, countersinks and edge mills effectively in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Comes with hex key, dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

The holder-mounted countersink drill, countersinks and edge mills efficiently in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Supplied with hex key, dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

The holder-mounted countersink drill, countersinks and edge mills efficiently in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Supplied with hex key, dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

De op de opsteekhouder gemonteerde verzinkboor boort, verzinkt en ontbraamt efficiënt in één stap in hout. Gemonteerd op een houtspiraalboor kunnen alle drie de toepassingen gelijktijdig en met...

Alle houtspiraalboren zijn conform strenge Bosch fabrieksnormen gemaakt. Extreem scherpe boorgereedschappen voor nauwkeurige, gladde boorgaten. Met behulp van het CBN-slijpproces en een...

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head guarantees problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Robust Line hammer set SDS plus-5 with 5 pieces

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head guarantees problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Robust Line hammer set SDS plus-5 with 5 pieces

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm

Boor, spiraalboor, 3.5 mm, cilindrisch, lengte: 70 mm

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers. Package with one piece.

Boor, spiraalboor, 4.2 mm, H8, cilindrisch, lengte: 75 mm

Boor, spiraalboor, 5 mm, cilindrisch, lengte: 86 mm

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers. Package of 10 pieces.

De HSS-Co spiraalboor heeft bij het boren van roestvrij staal een lange levensduur. Voor deze langere levensduur zorgen de metalen legering met 5% kobaltgehalte en het massief geslepen HSS-staal met...

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers. Package with two pieces.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shank system (the shank has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers. Package with two pieces.