Handboormachines (10.000)

Naast boren voer je ook beitelwerk uit, zoals het afbreken van een stenen muur of het afbikken van tegels.Je boort gaten van 26 millimeter groot in beton, waardoor je de meeste klussen in en om het huis aanpakt.Je houdt de combihamer goed onder controle door het lichte gewicht van 2,9 kilogram.Zonder ingebouwd licht is boren op slecht verlichte plekken lastig.Je werkt minder lang comfortabel door het hoge gewicht van 2,9 kilogram.

Cordless hammer drill, Uneo Maxx, Max. drilling diameter in concrete: 10 mm, Max. drilling diameter in steel: 8 mm Includes: Cardboard box, Concrete drills Ø 6 and 8 mm, Round shank adapter, Universal drill Ø 5 and 6 mm, 4 long bits

De krachtige en compacte 3-in-1 accuboorhamer Uneo Maxx is ontworpen voor de moeilijkste hamer-, boor- en schroefwerkzaamheden in beton, metselwerk, metaal, hout en tegels. Een pneumatisch Bosch...

Diamantslijper, voor tegels, keramiek, harde keramiek, 20 mm, M14

Premium X-Line boor- en schroevendraaierbitset met 49 stuks.

Schroevendraaier- en boorset, voor hout, metaal, beton, 76 stuks

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic. Assortment of 8 pieces

Schroevendraaier- en boorset, voor hout, metaal, beton, 91 stuks

Diamantboorset, 5 stuks, 25 mm, 20 mm, 35 mm, 68 mm, 51 mm

Accuschroefboormachine GSR 12V-15 met FlexiClick wisselsysteem. Flexibel voor elke toepassing het juiste opzetstuk. Met enkele handelingen simpel en veilig verbonden: zet het opzetstuk op de...

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers. Package contains 2 pieces.

Boor, voor metaal, spiraalboor, 2 stuks, 2 mm, lengte: 49 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers. Package contains 2 pieces.

Boor, voor metaal, spiraalboor, 2 stuks, 3 mm, lengte: 61 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers. Package contains 2 pieces.

Boor, voor metaal, spiraalboor, 2 stuks, 3.5 mm, lengte: 70 mm

Boor, voor metaal, spiraalboor, 2 stuks, 4 mm, lengte: 75 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers. Package contains one piece.

Boor, voor metaal, spiraalboor, 4.5 mm, lengte: 80 mm

Boor, voor metaal, spiraalboor, 5 mm, lengte: 86 mm

Boor, voor metaal, spiraalboor, 5.5 mm, lengte: 93 mm

Boor, voor metaal, spiraalboor, 6 mm, lengte: 93 mm

Boor, voor metaal, spiraalboor, 6.5 mm, lengte: 101 mm

Boor, voor metaal, spiraalboor, 8 mm, lengte: 117 mm

Boor, voor metaal, spiraalboor, 10 mm, lengte: 133 mm

Boor, voor metaal, spiraalboor, 13 mm, lengte: 151 mm

Boor, voor metaal, spiraalboor, 10 stuks, 4.5 mm, lengte: 80 mm

Bosch

Bosch HSS Spiraalboor PointTeQ

Boor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, ongelegeerd staal, spiraalboor van 14 mm diameter en cilindrische vorm met een lengte van 160 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers. Package contains one piece.

Boor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, niet-gelegeerd staal, spiraalboor 15 mm cilindrisch

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers. Package contains one piece.

De HSS spiraalboor PointTeQ maakt snel boren in metaal mogelijk door de PointTeQ-boorpunt. Snel en eenvoudig aanboren is mogelijk, omdat de zelfcentrerende punt weglopen voorkomt. Vanwege de verhoogde...

Spiraalboor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, ongelegeerd staal, twist bit (spiraalvormige boor), 17 mm diameter en cilindrisch

Drill bit, for plastic, non-ferrous metal, cast iron, cast steel, alloyed steel, non-alloyed steel, twist bit, 19 mm, cylindrical