Loodgietersbenodigdheden (1.077)

for the installation of large steel trays from only 6.5 cm installation height installation height: from 6.5 to 19 cm dimensions: 70 x 70 cm - 100 x 180 cm

for extending the installation situation with a mounting frame SF in case of a drain pipe running along the wall for bridging the tub feet of a mounting frame in case of an obstacle

for reducing the installation height of a mounting frame SF

Intended use:Pre-assembled connection crosspiece for single-hole basin mixerfor drywall installationfor individual installation in a lightweight stud wallProperties:sendzimir-galvanised C-profileScope of delivery:2 mounting plates to accept commercially available wall platesheight-adjustable drainage elbow holderHT drainage elbow DN 50/50 with rubber sleeve NW 30/50, 2-fold depth-adjustablefixing material

Intended use:For connecting wall-mounted WCsProperties:Material PP, weldableScope of delivery:Flush pipe connection piece with lip sealWC connection piece with sealing sleeveWall-mounted WC fastening set M12

for the installation of heavy extra- & super flat rectangular mineral cast shower trays from 70 x 70 to 120 x 120 cm height adjustable from 5,5 to 19 cm

Intended use:Pre-assembled mounting element for wall-hung WCfor drywall installationfor individual installation in front of a solid wall or in alightweight stud wallfor rail installation in front of a solid wall or in front of alightweight stud wallProperties:System construction height 100 cmSelf-supporting assembly frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable foot supports 0 - 24 cm with integrated anti-slip,Foot plates can be rotated, Drilling error compensating depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre marker for exact alignment of the centre of the elementFlush-mounted cistern Sanicontrol type B31dual-flush or single-flush or start/stop flush technology EasyConnectflush technologyEasyConnect system for tool-free installation on the cisternCistern completely pre-assembledTesting and CE marking in accordance with DIN EN 14 055Water connection on the leftFlush volume 6/3 litres (factory setting)Flush volumes can be set separately:Large flush volume 5 - 7 l, infinitelySmall flush volume 3 - 4.5 l, infinitelyMaximum flush volume 7.5 lImmediate rinsing possible with factory settingIntegrated flush flow restrictor for infinitely variable reduction of theflush flow of approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling)Insulated against condensation25-year spare parts guarantee in accordance with the Mepa guarantee conditionsMechanical actuation from the front or from aboveWC connection elbow, depth-adjustable in 3 positionsConnection of shower toilet systems possibleScope of delivery:Wall bracket set for individual installation in front of solid wallInstallation set for installation in lightweight stud wallWater connection G 1/2 A with integrated angle valve and handwheelPE wall-mounted WC connection elbow DN 90PE wall-mounted WC connection set DN 90Transition piece DN 90/110Wall-mounted WC fastening set M12Protective construction box for inspection opening2 protective plugsFastening materialNote:We recommend the use of WC ceramics 4.5 litres for the best possible flushing performance.Only surface-mounted installation of flush plates possible.MEPAsun flush plate only possible from the front.

Intended use:Pre-assembled installation element for barrier-free wall-hung WCfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wallfor installation in accordance with DIN 18 040for installation of WC ceramics with extended projection of up to 70 cmProperties:System installation height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable foot supports 0 - 24 cm with integrated anti-slip featureFoot plates can be rotatedDepth to compensate for drilling errors suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre and metre markings for exact installation in UW profile UW 50 and UW 75 and Mepa C profile and metre markings for exact alignment of the axis centre and installation height of the element Flush-mounted cistern Sanicontrol type A31Dual flush or single flush or start/stop flush technologyEasyConnect system for tool-free installation on the cisternCistern completely pre-assembledTesting and CE marking in accordance with DIN EN 14 055Water connection on the left or rearFlush volume 6/3 l (factory setting)Flush volumes can be set separately:Large flush volume 5 - 7 l, infinitelySmall flush volume 3 - 4.5 l, infinitelyMaximum flush volume 7.5 lImmediate rinsing possible with factory settingIntegrated flush flow restrictor for infinitely variable reduction of the flush flow from approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling)Insulated against condensation25-year spare parts guarantee in accordance with the Mepa guarantee conditionsMechanical actuation from the frontWC connection elbow, depth-adjustable in 3 positionsShower toilet systems can be connectedPreset for seat height 48 cmScope of delivery:Installation set for installation in lightweight stud wallWater connection G 1/2 A with integrated angle valve and handwheelPE Wall-mounted WC connection elbow DN 90PE Wall-mounted WC connection set DN 90PE Transition piece DN 90/110Wall-mounted WC fastening set M12Protective construction box for inspection opening2 protective plugsFastening materialNote:Minimum installation depth in lightweight stud wall 20 cm.Extension with support/folding support handle element possible.Extension with Sanicontrol 1061 WC control for folding support handles with E-button possible.WC pipework set Connection for folding support handles E-button, see accessories.Extension with Sanicontrol 1065 WC control for folding support handles with radio transmitter possible.

System height 120 cm Self-supporting mounting frame Suitable for planking with gypsum fiber or gypsum plaster boards

Intended use:Pre-assembled installation element for wall-hung WCfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall for odour extraction when operated with Zero Lumo flush plate, the fan can be controlled either manually or automatically System installation height 120 cm or infront of a lightweight stud wall for odour extraction when used with the Zero Lumo flush plate, the fan can be activated either manually or automatically Properties:System height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable footrests 0 - 24 cm with integrated anti-slip protection, swivelling foot plates, compensating for drilling errors, Depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre and metre markings for exact alignment of the centre of the axis and installation height of the elementFlush-mounted cistern Sanicontrol type A31dual-flush or single-flush or start/stop flush technology EasyConnectflush technologyEasyConnect system for tool-free installation on the cisternCistern completely pre-assembledTesting and CE labelling in accordance with DIN EN 14 055Water connection on the rightFlush volume 6/3 l (factory setting)Flush volumes can be set separately:large flush volume 5 - 7 l, infinitely variablesmall flush volume 3 - 4.5 l, infinitely variablemaximum flush volume 7.5 limmediate rinsing possible with factory settingintegrated flush flow restrictor for infinitely variable reduction of the flush flow from approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling) (max. throttling)Insulated against condensation25-year spare parts guarantee in accordance with the Mepa guarantee conditionsMechanical actuation from the frontWC connection elbow, depth-adjustable in 3 positionsConnection of shower toilet systems possibleOdour extraction with integrated radial fanManual or electronic fan operationSpeed regulation230/24 DC volt mains operation via integrated flush-mounted power supply unit, Protection class IP 54Leak-tight non-return flapScope of delivery:Installation set for installation in lightweight stud wallWater connection G 1/2 A with integrated angle valve and handwheelPE Wall-mounted WC connection elbow DN 90PE Wall-mounted WC connection set DN 90PE Transition piece DN 90/110Wall-mounted WC fastening set M12 Protective boxfor inspection opening 2protective plugs Pipe connection set for fan Fastening material Notes: Due to the low fan performance and the associated limited exhaust air volume, the Air-WC must not be used as a replacement for a room ventilation system in accordance with DIN 18017. Not suitable for certain WC ceramics, see fitting list.

Intended use:Pre-assembled mounting element for child-friendly floor-standing WCfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall System installation height 120 cm Self-supporting mounting frame or infront of a lightweight stud wall Properties:System installation height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable footrests 0 - 24 cm with integrated anti-slip feature, swivelling foot plates, compensating for drilling errors, depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre and metre markings for exact alignment of the axis centre and installation height of the elementFlush-mounted cistern Sanicontrol type A31dual flush or single flush or start/stop flush technologyFlush technologyCistern completely pre-assembledTesting and CE marking in accordance with DIN EN 14 055EasyConnect system for tool-free installation on the cisternWater connection on the left or rearFlush volume 6/3 litres (factory setting)Flush volumes can be set separately:large flush volume 5 - 7 l, infinitelysmall flush volume 3 - 4.5 l, infinitelymaximum flush volume 7.5 limmediate rinsing possible with factory settingintegrated flush flow restrictor for infinitely variable reduction of theflush flow from approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling) (max. throttling)Insulated against condensation25-year spare parts guarantee in accordance with the Mepa guarantee conditionsMechanical actuation from the frontWC connection elbow 3-way depth-adjustableInlet and outlet connections continuously height-adjustable in parallel:Inlet 25 - 30 cmOutlet 12 - 17 cmScope of delivery:Wall bracket set for individual installation in front of solid wallInstallation set for installation in stud lightweight wallWater connection G 1/2 A with integrated angle valve and handwheel Protective construction boxfor inspection opening 2protective plugs Fixing materials Note: WC connection set for floor-standing WC not included in scope of delivery. The height of the inspection opening varies by the set dimension: 88.5 - 93.5 cm.

Intended use:Pre-assembled mounting element for wall-hung WCfor drywall installationfor individual installation in front of a solid or stud partition wallfor rail installation in front of a solid or stud partition wallfor subsequent WC height adjustment system construction height 120 cm self-supporting mounting frame suitable for planking with gypsum fibreboard or plasterboard powder-coated profile frameHeight adjustmentProperties:System installation height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable footrests 0 - 24 cm with integrated anti-slip protection,swivelling foot plates, compensating for drilling errors,Depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profile Centre and metre markings for exact alignment of the axis centre and installation height of the element Flush-mounted cistern Sanicontrol type A31 dual-flush or single-flush or start/stop flush technology EasyConnect-System for tool-free installation on the cistern Cistern completely pre-assembled Testing and CE marking in accordance with DIN EN 14 055 Water connection left or rear Water connection G 1/2 A with integrated angle valve and handwheel Flush volume 6/3 l (factory setting) Flush volumes can be set separately: large flush volume 5 - 7 l, infinitely small flush volume 3 - 4.5 l, infinitely maximum flush volume 7.5 l with factory setting immediate rinsing possible integrated flush flow restrictor for infinitely variable reduction of the flush flow from approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling) (max. throttling) Insulated against condensation 25-year spare parts guarantee in accordance with the Mepa guarantee conditions Mechanical actuation from the front WC connection elbow 3-way depth-adjustable WC height adjustment: Adjustable bolt height 340-380 mm, WC fixing bolts height-adjustable even after tiling Scope of delivery:Installation set for installation in lightweight stud wallWater connection G 1/2 A with integrated angle valve and handwheelPE Wall-mounted WC connection elbow DN 90PE Wall-mounted WC connection set DN 90PE Transition piece DN 90/110Wall-mounted WC fixing set M12 Construction protection boxfor inspection opening 2protective plugs Fixing material Notes: Connection of shower toilet systems not possible.

Intended use:Pre-assembled mounting element for wall-hung WCfor odour extractionfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall system installation height 120 cm self-supporting mounting frame or infront of a lightweight stud wall Properties:System height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable footrests 0 - 24 cm with integrated anti-slip feature, swivelling foot plates, compensating for drilling errors, depth suitable for installation in UW profile UW 50 and UW 75 andm Mepa C profileCentre and metre markings for exact alignment of the centre of the axis and installation height of the elementFlush-mounted cistern Sanicontrol type A31dual flush or single flush or start/stop flush technology EasyConnectflush technologyEasyConnect system for tool-free installation on the cisternCistern completely pre-assembledTesting and CE labelling in accordance with DIN EN 14 055Water connection on the rightFlush volume 6/3 l (factory setting)Flush volumes can be set separately:large flush volume 5 - 7 l, infinitely variablesmall flush volume 3 - 4.5 l, infinitely variablemaximum flush volume 7.5 limmediate rinsing possible with factory settingintegrated flush flow restrictor for infinitely variable reduction of the flush flow from approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling) (max. throttling)Condensation water-insulated25-year spare parts guarantee in accordance with the Mepa guarantee conditionsMechanical actuation from the frontWC connection elbow 3-way depth-adjustableConnection of shower toilet systems possibleOdour extraction with integrated radial fanFan operation electronicSpeed regulation230/24 DC Volt Mains operation via integrated flush-mounted power supply unit, Protection class IP 54Leak-proof non-return flapScope of delivery:Mounting set for installation in lightweight stud wallWater connection G 1/2 A with integrated angle valve and handwheelPE Wall-mounted WC connection elbow DN 90 PE Wall-mounted WC connection set DN 90Connection set DN 90 PE Transition piece DN 90/110 Wall-mounted WC fastening set M12 Construction protection boxfor inspection opening 2protective plugs Pipe connection set for fan Fastening material Accessories Page Notes: Due to the low fan performance and the associated limited exhaust air volume, the Air-WC must not be used as a replacement for a room ventilation system in accordance with DIN 18017. Not suitable for certain WC ceramics, see fitting list.

Intended use:Pre-assembled mounting element for wall-hung WCfor connecting an external odour extraction systemfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall system installation height 120 cm self-supporting mounting frame or infront of a lightweight stud wall Properties:System height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable footrests 0 - 24 cm with integrated anti-slip protection, swivelling foot plates, to compensate for drilling errors,Depth suitable for installation in UW profile UW 50 and UW 75 and MPA-C profileCentre and metre markings for exact alignment of the axis centre and installation height of the elementFlush-mounted cistern Sanicontrol type A31dual-flush or single-flush or start/stop flush technology EasyConnectflush technologyEasyConnect system for tool-free installation on the cisternCistern completely pre-assembledTesting and CE marking in accordance with DIN EN 14 055Water connection left or rearFlush volume 6/3 l (factory setting)Flush volumes can be set separately:large flush volume 5 - 7 l, infinitelysmall flush volume 3 - 4.5 l, infinitelymaximum flush volume 7.5 limmediate rinsing possible with factory settingintegrated flush flow restrictor for infinitely variable reduction of the flush flow from approx. 2.2 l/s (min. throttling) to approx. 1.8 l/s (max. throttling) throttling)Insulated against condensation25-year spare parts guarantee in accordance with the Mepa guarantee conditionsMechanical actuation from the frontWC connection elbow, 3-way depth-adjustableExternal odour extraction with DN 50 connection sleeve can be connected via flush pipe elbowShower toilet systems can be connectedScope of delivery:Installation set for installation in lightweight stud constructionSet for installation in lightweight stud wall Water connection G 1/2 A with integrated angle valve and handwheel PE Wall-mounted WC connection elbow DN 90 PE Wall-mounted WC connection set DN 90 PE Transition piece DN 90/110 Wall-mounted WC fastening set M12 Construction protection boxfor inspection opening 2protective plugs Fastening material Note: Not suitable for certain WC ceramics, see fitting list.

Intended use:for connecting mounting elements or supports with a C-profile front and bottom railFeatures:Steel, sendzimir galvanizedZinc die-castScope of delivery:5 foot plates rail assembly, left5 foot plates rail assembly, right10 lugs with quick release fastenerNotes:one mounting set consists of 1 foot plate rail mounting left and right, 2 lugs with quick release fastenerone mounting set is designed for 1 mounting element or 2 supports (left/right)

Intended use:Pre-assembled mounting element for single-hole furniture washbasin mixerfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall or infront of a lightweight stud wall Properties:System installation height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable foot supports 0 - 24 cm with integrated anti-slip feature,swivelling foot plates, compensating for drilling errors,Depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profile Centre and metre markings for exact alignment of the axis centre and installation height of the element Height-adjustable, non-slip connection crossbars for water connection, drain, without tools, Ceramic fixing Hole spacing for ceramic fixing 4 - 31 cm Installation of commercially available wall discs G 1/2 possible Scope of delivery:Wall bracket set for individual installation in front of solid wallInstallation set for installation in lightweight stud wall 2sound-insulated Mepa wall discs G 1/2 Height-adjustable drain elbow holder HT siphon elbow DN 50/50 with rubber sleeve NW 30/40, with building protection plug 2threaded bolts M10 Fixing material Notes: Can be shortened up to system installation height 850 mm with conversion set C-rail system installation height 85 - 100. The installation element for hinged support handles is also required for the installation of furniture washbasins, see accessories. Depending on the installation width, which depends on the centre distance of the fixing points of the furniture washbasin, the hinged support handle elements must be fixed or installed with 2 additional supports. [/liste]

Intended use:Pre-assembled mounting element for wall-mounted washbasin mixerfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wallProperties:System construction height 120 cmSelf-supporting assembly frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable foot supports 0 - 24 cm with integrated anti-slip protection, swivelling foot plates, compensates for drilling errors,Depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre and metre markings for exact alignment of the axis centre and installation height of the elementHeight-adjustable, non-slip connection crossbars for water connection, drain, ceramic fixing, without toolsHole spacing for ceramic fixing max. 40 cmInstallation of commercially available G 1/2 wall discs possibleElement height can be adapted to ceramic, can be extended from 115 - 132.5 cmScope of delivery:Installation set for installation in lightweight stud wall2 sound-insulated Mepa wall discs G 1/2Height-adjustable drain elbow holderHT drain elbow DN 50 with rubber sleeve NW 30/50Ceramic fixing Plywood panel 42 x 10 x 3.8 cm2 hanger bolts M10Foot extension set 17.5 cmFixing materials

Intended use:Pre-assembled mounting element for barrier-free single-hole or wall-mounted washbasin mixerfor installation in accordance with DIN 18 040for drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wallProperties:System construction height 120 cmSelf-supporting assembly frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable foot supports 0 - 24 cm with integrated anti-slip, swivelling foot plates, compensates for drilling errors, Depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre and metre markings for exact alignment of the centre of the axis and installation height of the elementHeight-adjustable, non-slip connection crossbars for water connection, drain, ceramic fixing without toolsHole spacing for ceramic fixing 15 - 24 cm and 28 cmStandard G 1/2 wall washers can be fittedScope of delivery:Installation set for installation in lightweight stud wall2 sound-insulated MEpa wall plates G 1/2Concealed trap with chrome-plated connection pipe and cover plate, chrome-plated plastic, odour trap in concealed housing 5 cm height-adjustable, removable2 M10 threaded boltsFixing materials

Pre-assembled mounting element for urinal with concealed inlet from behind

Intended use:Pre-assembled mounting element for urinal with concealed inlet from behindfor combination with electronic or mechanical flush-mounted urinal flush control Sanicontrol K3for drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall system installation height 120 cm self-supporting mounting frame or infront of a lightweight stud wall Properties:System installation height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable foot supports 0 - 24 cm with integrated anti-slip protection, foot plates rotatable, compensates for drilling errors, depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profileCentre and metre markings for exact alignment of the centre of the axis and installation height of the elementheight-adjustable without tools, non-slip connection crossbars for water connection, drain, ceramic fixingElement height can be adapted to ceramic, can be extended from 115 - 132.5 cmfor operating pressure 0,3 - 10 bar vandal-proof Scope of delivery:Installation set for installation in stud lightweight wallCeramic plywood panel fixing 42 x 10 x 2.1 cm 2M8 hanger bolts Sound-insulated Mepa wall disc G 1/2 Drain pipe clamp DN 50 HT drain elbow DN 50 Armoured hoseDN 12 G 1/2 A x G 3/4 non-twist, Length 50 cm Inlet connector DN 15 Flush-mounted housing for Mepa urinal flush controls Sanicontrol, with water connection G 1/2 A at the top of the flush-mounted housing Water section G 3/4 with ball valve, for pre-shut-off, pre-assembled in the flush-mounted housing Connection terminal for electrical connection 230 VAC at the top of the flush-mounted housing Construction protectionservice opening, can be cut to length, 13 x 11 x 3 cm Foot extension set 17.5 cm Fixing materials Note: Suitable for urinals with horizontal outlet without moulded odour trap.

Intended use:For rail mounting in front of a solid or stud lightweight partition wallFor bridging gaps > 580 mm and as start and end supportProperties:System installation height 1200 mmSuitable for planking with gypsum fibreboard or plasterboardPowder-coated supportHeight-adjustable foot supports 0 - 240 mm with integrated anti-slip, foot plates rotatable, compensates for drilling errors, depth suitable for installation in UW profile UW 50 and UW 75 and MEPA C profileMetre markings for exact alignment of the installation height of the supportScope of delivery:1 supportFixing materialNote:Can be shortened up to system installation height 850 mm with C-rail conversion set System installation height 85 - 100

Intended use:for fastening of mounting elements in corner mounting in front of solid wallFeatures:sendzimir galvanized C-profileScope of delivery:5 C-profiles2 mounting lugs for connecting a mounting elementMounting materialNotice:not suitable for WC elements in system height 85 cm and 100 cmnot suitable for Air WC elementsnot suitable for Mondo WC elements

Intended use:Pre-assembled mounting element for support or hinged support handlesfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall for installation in accordance with DIN 18 040 system construction height 120 cm self-supporting mounting element or in front of a lightweight stud wall for installation in accordance with DIN 18 040 Properties:System construction height 120 cmSelf-supporting mounting elementSuitable for planking with gypsum fibreboard or plasterboard Powder-coated supportHeight-adjustable foot support 0 - 24 cm with integrated anti-slip protection,Footplate rotatable, compensates for drilling errors, depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profile Metre markings for exact alignment of the installation height of the element Scope of delivery: 1support Plywood panel 20 x 69 x 3.8 cm Fixing materials Note: Convertible for left or right connection to laterally adjoining mounting element or single support.

Intended use:Pre-assembled mounting element for wall-hung bidetfor drywall installationfor individual installation in front of a solid wall or in a lightweight stud wallfor rail installation in front of a solid wall or in front of a lightweight stud wall system installation height 120 cm self-supporting mounting frame or infront of a lightweight stud wall Properties:System installation height 120 cmSelf-supporting mounting frameSuitable for planking with gypsum fibreboard or plasterboardPowder-coated profile frameHeight-adjustable footrests 0 - 24 cm with integrated anti-slip feature,swivelling foot plates, compensating for drilling errors,Depth suitable for installation in UW profile UW 50 and UW 75 and Mepa C profile Centre and metre markings for exact alignment of the axis centre and installation height of the element Height-adjustable connection crossbars for water connection, ceramic fixing,Drain Height and side-adjustable fixing for wall discs Scope of delivery:Mounting set for installation in lightweight stud wall 2sound-insulated Mepa wall discs G 1/2 Height-adjustable drain pipe clamp HT drain bend DN 40/50 with rubber sleeve NW 32/40, can be shortened, with building protection plug 2threaded bolts M12 Fixing materials l Note: Can be shortened up to system installation height 85 cm with C-rail conversion set System installation height 85 - 100.

Intended use:For connecting object mounting elements with a C-profile front and base railProperties:Steel, sendzimir galvanisedScope of delivery:10 brackets with quick-release fastener10 quick-release fasteners for base platesAccessories:An assembly set consists of 2 brackets with quick-release fasteners and 2 quick-release fasteners for the base plates of an assembly elementand is designed for 1 assembly element

pre-assembled mounting element for wall-hung WC for mounting in a corner of a room for drywall mounting for individual mounting in front of a solid wall

Onze 12 Art Side profiel is nuttig als vrij aanpasbare bevestiging voor de flexibele Side Art band en sluit perfect aan bij de band, waardoor er geen deksel nodig is.Bovendien wordt het gebruikt voor de warmteafvoer van de LED-band, wat de levensduur van het geïnstalleerde product verlengt.

Onze Flach montageprofiel 12 in deze variant wordt gebruikt op muren en plafonds. Daarnaast helpt het om de warmte van LED-strips af te voeren, waardoor de levensduur van het geïnstalleerde product wordt verlengd. Het beschermt ook tegen stof en vocht. In combinatie met een mat of opale kap wordt het licht verspreid en wordt de verlichting veel homogener. Alternatief kan ook een transparante kap worden geïnstalleerd. LED-strips met een maximale breedte van 12,3 mm kunnen in het profiel worden geïntegreerd.

Suitable for the two-way diverter art. 29140360-00

suitable for washbasin and bidet fitting

across series

suitable for Meta pur among others

for flush-mounted fittings

suitable for extension 2 cm art. 1207897090 extension 5 cm art. 1207697090

Seal

suitable for 29140670