Sanitair (10.000)

1 piece stainless steel

for fastening to TECEprofil profile pipes or for installation in metal or wooden post-and-beam walls and as pre-wall or corner module

incl. actuating rods and fixing material

with electronic sen-Touch actuation buttons and mounting material

for fastening to TECEprofil profile pipes or for installation in metal or wooden post-and-beam walls and as pre-wall or corner module

for the electrical fixed connection of the sen-Touch glass plate

Metal cover frame for combination with the WC installation frame

Tece

for combination with the TECEnow actuator plate

made of torsion-resistant thermoset with "Soft-Close" soft-closing mechanism for firmly cast TECEone toilet seat and lid fastening

Flat glass actuation with trigger motor for dual flush Front actuation incl. fixing material

Tece

Tece

Front-wall or corner module, operated from the front with odor extraction connection

for fastening to TECEprofil profile pipes, for installation in metal or wooden post-and-beam walls o. as pre-wall or corner module

Wet cistern with safety tank for installation in a masonry pre-wall, height 106 cm for WC fitting and TECE actuator plates

Tece

for mounting in TECEprofil pre-wall or in front of a solid wall with Uni cistern for operation from the front or from above

for combination with sliding doors and swing doors of the same height fully framed version can be used on the left and right incl. corner connection profile

Properties:For mechanical urinal flush releaseFor concealed installationMaterial: plasticActuation from the frontOperating pressure 1 - 4 barFlush volume 3 l (+/- 1 l)Scope of delivery:Self-closing cartridgeFixing frameFixing materialNote:Installation in conjunction with Mepa nextVIT urinal element or MEPA urinal flush plate set.

Properties:For mechanical urinal flush releaseFor concealed installationMaterial: plasticActuation from the frontOperating pressure 1 - 4 barFlush volume 3 l (+/- 1 l)Scope of delivery:Self-closing cartridgeFixing frameFixing materialNote:Installation in conjunction with Mepa nextVIT urinal element or MEPA urinal flush plate set.

Properties:for automatic flush activation of urinalsfor Mepa mounting element for urinalfor MEPA urinal flush system body kitFront panel with security screw as theft protectionMaterial: die-cast zincVandal-proofInfrared proximity electronicsFlush time adjustable from 2 - 10 sec., factory setting 6 sec.Pre-flush adjustable from 0 - 6 sec, Factory setting 0 sec.Periodic hygiene flush, adjustable in 10 interval steps from 24 h - 240 hAdjustable number of flushes from 1 - 10 flushes per hygiene flush intervalAutomatic flush volume optimisationResponse range adjustable, factory setting approx. 50 cm in front of wallResponse range can be switched to urinals with lid (close-range function)Flush stop function for cleaning purposesReset function to restore factory settingsSettings via membrane keypad and IR remote controlMains operation 230 VAC / 24 VAC via internal power supply unitNon-interchangeable plug connectionsProtection class IP 44Operating pressure 0.2 - 10 barFlow rate 0.3 l/sec. at flow pressure 1 bar, 0.5 l/sec. at flow pressure 2 barScope of delivery:1 urinal front panel with IR electronics and membrane keypad1 mounting frame for urinal front panel1 power supply unit 230/24 VAC1 solenoid valve 24 V G 3/4 A with strainer2 flat gaskets G 3/41 IR remote control SC 900Fixing materials

Properties:for automatic flush activation of urinalsfor Mepa mounting element for urinalfor MEPA urinal flush system body kitFront panel with security screw as theft protectionMaterial: die-cast zincVandal-proofInfrared proximity electronicsFlush time adjustable from 2 - 10 sec., factory setting 6 sec.Pre-flush adjustable from 0 - 6 sec, Factory setting 0 sec.Periodic hygiene flush, adjustable in 10 interval steps from 24 h - 240 hAdjustable number of flushes from 1 - 10 flushes per hygiene flush intervalAutomatic flush volume optimisationResponse range adjustable, factory setting approx. 50 cm in front of wallResponse range can be switched to urinals with lid (close-range function)Flush stop function for cleaning purposesReset function to restore factory settingsSettings via membrane keypad and IR remote controlMains operation 230 VAC / 24 VAC via internal power supply unitNon-interchangeable plug connectionsProtection class IP 44Operating pressure 0.2 - 10 barFlow rate 0.3 l/sec. at flow pressure 1 bar, 0.5 l/sec. at flow pressure 2 barScope of delivery:1 urinal front panel with IR electronics and membrane keypad1 mounting frame for urinal front panel1 power supply unit 230/24 VAC1 solenoid valve 24 V G 3/4 A with strainer2 flat gaskets G 3/41 IR remote control SC 900Fixing materials

Properties:for automatic flush activation of urinalsfor Mepa mounting element for urinalfor MEPA urinal flush system body kitFront panel with security screw as theft protectionMaterial: die-cast zincVandal-proofInfrared proximity electronicsFlush time adjustable from 2 - 10 sec., factory setting 6 sec.Pre-flush adjustable from 0 - 6 sec, Factory setting 0 sec.Periodic hygiene flush, adjustable in 10 interval steps from 24 h - 240 hAdjustable number of flushes from 1 - 10 flushes per hygiene flush intervalAutomatic flush volume optimisationResponse range adjustable, factory setting approx. 50 cm in front of wallResponse range can be switched to urinals with lid (close-range function)Flush stop function for cleaning purposesReset function to restore factory settingsSettings via membrane keypad and IR remote controlMains operation 230 VAC / 24 VAC via internal power supply unitNon-interchangeable plug connectionsProtection class IP 44Operating pressure 0.2 - 10 barFlow rate 0.3 l/sec. at flow pressure 1 bar, 0.5 l/sec. at flow pressure 2 barScope of delivery:1 urinal front panel with IR electronics and membrane keypad1 mounting frame for urinal front panel1 power supply unit 230/24 VAC1 solenoid valve 24 V G 3/4 A with strainer2 flat gaskets G 3/41 IR remote control SC 900Fixing materials

Entry width 81 cm Adjustment range 87 - 89 cm

Washbasin valve

Side valves with 2 xControl ceramic tops 1/2" 2 pressure hoses 30 cm screwed in, drain set For narrow standing or half columns please order pressure hoses art.1250797090.

Side valves with 2 x Control ceramic tops 1/2", 2 pressure hoses Please order 2 x lever insert art.11170370-FF separately! For narrow standing or half columns please pressure hoses Art.1250797090 required!

2 xControl ceramic tops 1/2" 2 pressure hoses M 10 x 1, drain fitting 1 1/4".

Ceramic tops 1/2", bath/shower diverter Shower holder, hand shower and 125 cm shower hose Concealed S-connections 1/2" x 3/4" (silenced) Stitch size 15 cm

Total height: 90 cm, free spout Ceramic tops 1/2" Conversion tub/shower Shower holder, hand shower and 125 cm shower hose Thrust rosettes Ø 9 cm, spur: 15 cm

Side valves with ceramic tops 1/2" automatic changeover tub/shower hand shower

Available in several colors

Projection 20 cm swivel spout Faucet height 41.5 cm

Faucet height: 40 / projection 23.5 cm swivel spout 360 °