AlcoSense (4)

Alcosense Breathalyser Pro gives you extreme accuracy, many functions and user-friendliness on a new level.

Alcosense Breathalyser Ultra delivers up to twice as much accuracy compared to breathalyzers in the same price range, which is on a par with police equipment. At the level of police equipment Advanced sampling system with temperature compensation Eliminates erroneous reading with too low a result Hours that work out when you get sober and time to test again Blow Coach makes it easy to blow right when you measure the per mille value AlcoSense Ultra is the first breathalyzer in the world to use the same professional 200mm fuel cell alcohol sensor found in the breathalyzers of several British, American and European police officers. AlcoSense Ultra uses a professional quality sampling system to ensure that only deep lung air (the most accurate part of the breath) is measured by the sensor. It uses professional-quality sensors to measure air pressure, flow rate and breathing volume and takes a reading when 1 liter of air has exhaled, ensuring that the most accurate sample is always analyzed. To further improve accuracy, the readings are fine-tuned to temperature. These sensors also allow Ultra to use BlowCoach. Most problems when making a blood alcohol level measurement with an breathalyzer are caused by the user either blowing too hard, too soft or not long enough, and with some products this can cause incorrect results. BlowCoach is a patent-pending technology from AlcoSense that makes it easy to perform a perfect test every time! Ultra shows you on-screen messages in real time about how to blow. All you need to do is hold the upper pressure gauge in the center of the gauge and keep blowing until the lower volume gauge is full. Each breathalyzer has an accuracy tolerance of +/- X.XX for the reading - the smaller the number, the more accurate the breathalyzer. AlcoSense Ultra has a smart software to avoid - that is, instead of having a tolerance of +/- 0.10 ‰ BAC, AlcoSense Ultra has a tolerance of +0.07 ‰ BAC, -0.00 ‰ BAC. This means that Ulta always reads the result as a little higher, than lower, to be on the safe side - the result is more than three times as accurate as the award-winning AlcoSense Elite. With one click, AlcoSense Ultra works with any limit, anywhere in the world! Just select the country or region you are driving in from the menu and use AlcoSense's patented technology that complies with local law. The breathalyzer uses the limit and unit of measure where you are and uses blood conversion to enable accurate readings of either alcohol measurement in the blood or in the exhalation. If a limit is changed, the device can be updated via a software download from our support page. Perfect for you as a border commuter, and even for travel between continents. AlcoSense Ultra has a full-color 1.8-inch (48 mm) TFT screen that provides clear and detailed readings of your alcohol level. You can choose reading of exhalation or blood (mg / L or µg / 100 ml) or blood (% BAC or ‰ BAC). If you are near or over your chosen limit, Ultra will warn you not to drive. AlcoSense Ultra even calculates how long it can take until you are sober and shows it at the same time as the result of your measurement, see picture above and below. Do you want a reminder of when to test again later? No problem, just press the alarm icon and Ultra will notify you when it's time for a new test again later. All breathalyzers require recalibration after a period of use. AlcoSense Ultra has an industry-leading calibration period of 12 months from the first time you use it. To improve reliability and ease of use, AlcoSense Ultra reminds you to recalibrate after 11 months of use. If an breathalyzer is used under conditions that deviate from the meter's normal operating temperature, you may get incorrect readings. The temperature can affect the quality of the reaction inside the sensor. For your safety and protection, AlcoSense Ultra warns you if the device is used in temperatures that deviate from 5 ° C ~ 40 ° C. This means that, unlike competing brands, Ultra will never let you perform a test if the risk is available. an incorrect result. Unlike competing brands, AlcoSense Ultra also protects you from errors caused by Sensor Saturation. Sensor saturation can affect all breathalyzers, including police breathalyzers, and occurs when extremely high alcohol levels are blown directly into the sensor. This usually happens when a breath test is performed shortly after drinking alcohol, when there is still alcohol in the mouth. The sensor becomes overloaded, so-called saturation occurs. Readings taken after this may be unreliable until the sensor has been reset. For your safety and security, AlcoSense Ultra will then enter a protection mode that allows the sensor to recover before further tests are allowed, to ensure that potentially erroneous readings do not occur. Alcosense Breathalyzer Ultra has the dimensions 107 x 55 x 29 mm, weighs 152g incl. batteries and has a 48mm TFT color display. 3 x AAA batteries, 100 professional mouthpieces, Micro USB cable and user manual included.

Mouthpiece, for alcohol tester (pak van 25)

The mouth pieces have a coarser inner surface which helps to reduce condensation in the alcohol meter and improves the accuracy of reading. Always use a mouthpiece on your breathalyzer, it reduces the risk of saliva entering the meter, which improves reading with your breathalyzer.