Bosch (34.620)

Socketadapter, 25-35 mm

Intended for planing. The stop allows for defining the rebate depth

The screw attachment allows for sinking screws into soft materials such as plasterboard and drywall without damaging the surface. It has a depth coupling that prevents screws from being screwed too tightly during sinking tasks. The attachment has a 1/4 shaft with an external hexagonal shaft for use with all screwdrivers and drills. It is suitable for mounting PH2 screws. Depth stop for screw work PH2 output

Sleutelhouder, zeshoekig, cilindrisch

The conical grinding cups provide a long lifespan when grinding stone and concrete. Its high-quality silicon carbide abrasive grain is designed for durability in use. It is intended for grinding stone and concrete. The best results and the greatest safety are achieved by only using the conical grinding cups together with two-handed angle grinders with a maximum speed of 8500 o o/min. It is suitable for use with two-handed angle grinders with a maximum speed of 8500 o o/min

Bosch

It is intended for use on screwdrivers. The polishing sponge is used for polishing various surfaces such as metal and paint. Polishing sponge Foam rubber with rubber disc

Screwdriver

The brush provides a good, fine surface finish. It is equipped with wavy wire for light to moderately demanding cleaning tasks on small steel surfaces. Its shape makes it ideal for cleaning in very difficult-to-reach places such as corners and the inside of pipes and profiles. The brush is also suitable for removing rust, roughening, matt sanding and sanding paint. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Brush - Wavy Wire Optimally suited for processing very difficult-to-reach places. Suitable for light cleaning tasks in corners as well as internal processing of pipes and profiles such as rust removal, roughening, matting or removing paint.

The cup steel brush provides an excellent, fine surface finish. The brush has wavy wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and for cleaning formwork boards and cladding. This brush is ideal for use on steel surfaces and is also suitable for roughing, sanding, and paint stripping. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft. Cup Steel Brush - Wavy Wire Suitable For light to moderately demanding cleaning tasks on small to medium-sized metal surfaces such as removing coatings, rust removal, cleaning formwork boards and facades, roughening,sanding,and paint stripping.

Bosch 1 609 200 274 spaakwiel & wielborstel 10 cm

The paint mixer is suitable for stirring paint and varnishes. It has a 6mm straight shaft and is designed for use with all drill chucks with a diameter of at least 10mm. Paint mixer 6 mm round shaft

The countersink bit has a hexagonal shaft system and can also be used with all standard screwdrivers. The hexagonal shaft for the countersink bit creates smooth countersinks for screws and deburring of holes in soft materials. It functions easily and stably with seven 90-degree cutting edges. The high power transmission thanks to the shaft provides a flat result, and the ground countersink bit made of tool steel with optimal surface quality provides even work in wood and plastic

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back which allows them to penetrate deeply into the material providing good grip with a very discreet staple back

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Lux, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are ideal for general DIY tasks and professional stapling tasks. They provide extra strong joints and are ideal for a wide range of thin and also thicker materials. The staples have a narrow back so they can penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Lux, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are ideal for general DIY tasks and professional stapling tasks. They provide extra strong joints and are ideal for a wide range of thin and also thicker materials. The staples have a narrow back so they can penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

De rubberen zuigmond zorgt voor flexibiliteit bij het stofzuigen. Te verbinden met standaard afzuigbuizen van Bosch diameter: 35,0 mm, geschikt voor: GAS 10-50 RFH; GAS 10-50 RFK; GAS 12-30F; GAS...

De vloerzuigmond kan worden aangepast en beschikt over een glijvlak van staal en borstelharen aan elke kant. Hij kan met stofzuigerbuizen van Bosch stofzuigers worden verbonden. Diameter mm: 35,0,...

Designed for all Bosch hot air guns. The nozzle for the hot air gun provides a wide distribution of hot air on a surface for drying, paint removal or thawing. Nozzle with wide distribution of hot air for drying, paint removal, thawing

Designed for all Bosch hot air guns. The glass protection nozzle for the hot air gun has special side protectors that protect heat-sensitive materials such as glass. Glass protection nozzle with special side protection. Protects heat-sensitive materials such as glass

The drill chuck with key is a simple and secure solution for attaching drills to all tasks. With uniform clamping force for secure attachment of drills with cylindrical or hexagonal shank. The jaws are easily tightened and loosened with a key, which provides easy handling. Drill chucks with keys are available in different holders (1/2 - 20, 3/8 - 24, 5/8 - 16, B16 and SDS plus) for a wide range of capacities and are compatible with most common drills. See the technical information to learn more about impact resistance or suitability for counterclockwise rotation. Hammer-resistant design

Intended for planers. The textile dust bag is intended for collecting grinding dust. Dust bag for hand planer

Intended for planers. The adapter is an accessory for connecting the vacuum cleaner hose to the power tool. Adapter for hand planer

The screen to prevent splinters is compatible with jigsaws. The screen to prevent splinters prevents splinters on top of the material. It is most effective when sawing with the grain or diagonally. Surface protector for jigsaw

De spantang houdt de frees vast. Hij heeft een spanmoer en is compatibel met Bosch Frezen met een productiedatum vanaf 02/1985. Diameter inch: 1/4, geschikt voor: GGS 27; GGS 27 C...

Do not use on shaft bushings. The collet secures the milling cutter. Always use the correct size collet to avoid danger during use. Collet Intended for POF 400/500 and POF 52/50

Puzzelzaagblad, voor hout, spaanplaat, multiplex, vezelplaat, zachthout, 5 stuks, lengte: 100 mm

Decoupeerzaagblad, voor spaanplaat, multiplex, vezelplaat, zachthout, 5 stuks, lengte: 100 mm

Decoupeerzaagblad, voor multiplex, zachthout, gelamineerde panelen, niet-schurende houtmaterialen, 3 stuks, T-schacht, lengte: 83 mm

Decoupeerzaagblad, voor spaanplaat, multiplex, vezelplaat, zacht hout, 3 stuks, T-schacht, lengte: 100 mm

Zigzaglemmet, voor hout, vezelplaat, zachthout, niet-schurende houten materialen, 3 stuks, T-schacht, lengte: 100 mm

Zaagblad, voor plaatmetaal, 5 stuks, lengte: 92 mm

Zaagblad, voor aluminium, buizen, glasvezel, plaatmetaal, profielen, 5 stuks, lengte: 100 mm