Bosch (34.620)

Bosch

Bosch

The flat chisel can be used for standard chiseling for various demolition tasks in concrete and bricks. Good material removal for lighter tasks is made possible by the chisel's flat cutting edge. The chisel is intended for folding, demolition, and adaptation work as well as renovation of joints and clearing of reinforcements. The flat chisel can be used for standard chiseling for various demolition tasks in concrete and bricks. It is compatible with systems with a hexagonal shaft. Flat Chisel, which can be used for standard chiseling for various demolition tasks in concrete and bricks

It is compatible with a 28 mm hexagonal shaft system for rotary hammers. The rounded chisel can be used for standard chiseling for various demolition tasks in masonry and mortar. It has a wide and smooth design, which makes it effective for work in concrete and bricks, but the chisel is also intended for adaptation work in masonry. Rounded spade chisel Rounded spade chisel for standard chiseling of various demolition tasks in masonry and mortar

Shear saw blade set, voor plaatijzer, 5 stuks

De 2-delige set reciprozaagbladen zorgt voor exacte zaagsneden met dubbel zaagblad. De bladen zijn ontworpen voor het doorsnijden van materialen met een dikte tot 30 cm. Ze zijn ideaal voor het...

They are designed for the Bosch foam rubber saw GSG 300 Professional. Jigsaw blade set, 2 pieces, guarantees precise cuts as two blades cut together in tandem. The set's blades are designed for cutting materials up to 30 cm thick. They are ideal for cutting soft and elastic materials such as foam rubber or rubber-coated textiles. Saw blade set with 2 parts

De zaagbladgeleiding zorgt voor een nauwkeurige en comfortabele zaagsnede. Deze is compatibel met de Bosch schuimstofzaag GSG 300 Professional. Materiaaldikte, tot [mm]: 300....

De spantang houdt schuurgereedschap vast bij het werken. Met spanmoer; geschikt voor rechte slijpers. Diameter mm: 6, geschikt voor: GGS 7 C; GGS 27 L; GGS 27 LC; GGS 1212 Professional....

It comes with a locking nut and is compatible with grinders. The clamping device secures the grinding tool during work. Clamping device with clamping nut

De spantang houdt schuurgereedschap vast bij het werken. Met spanmoer; geschikt voor rechte slijpers. Diameter mm: 8, geschikt voor: GGS 7 C; GGS 27 L; GGS 27 LC; GGS 1212 Professional....

Slijpschijf, voor metaal, 115 mm

Steunschijf, 115 mm

Hij is ontworpen voor plaatscharen en universele scharen van Bosch. Systeemvoorstel: GUS 9,6 V, geschikt voor: GUS 9.6 V; GUS 12V-300 Professional....

This universal matrix is designed for straight cuts and curved cuts in metal when used together with Bosch sheet punches. It is easy to use, even for narrow cuts in a variety of types of sheet metal. It also handles complicated cutouts without deforming the material. Special matrix and punch suitable for corrugated sheets and almost all trapezoidal sheets up to 1.2 mm

It fits Bosch plate and universal axes. The movable blade is a spare blade designed for easy cutting of a wide range of materials. Movable knife

Bosch

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

Fladdyvel GR 0

.

Bosch

Snelvergrendelende moer

De spadebeitel met SDS max voor beton en bouwsteen maakt verschillende soorten sloopwerkzaamheden mogelijk. De brede snijrand neemt in metselwerk en mortel constant veel materiaal weg. De beitel is...

Jigzaagblad, voor tegels, keramiek, gietijzer, 3 stuks, korrel: 30

The cup steel brush provides an excellent, fine surface finish. The brush has wavy wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and for cleaning formwork boards and cladding. This brush is ideal for use on steel surfaces and is also suitable for roughing, sanding, and paint stripping. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft. Cup Steel Brush - Wavy Wire Suitable For Light to moderately demanding cleaning tasks on small to medium-sized metal surfaces such as removing coatings, rust removal, cleaning formwork boards and facades, roughening,sanding,and paint stripping.

Bosch Schijfborstels, gegolfde draad

Staalborstel, voor metaal, hout, 50 mm

The disc steel brush provides an extra fine surface finish. The disc is equipped with copper-coated, corrugated wire for easy and moderately demanding cleaning tasks on small surfaces. It is ideal for removing heat tint on welds and also suitable for cleaning smaller surfaces in metal or non-ferrous metals, edges or grooves. This disc steel brush is also suitable for removing rust, roughening, matting, texturing and sanding paint on metal and wood. The copper-coated wires on the disc provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Disc steel brush - corrugated wire, brass-plated Optimally suitedfor removal of heat tint on welds. Suitable foreasy to moderately demanding cleaning tasks on small surfaces,in grooves or edges of metal or non-precious metals such as removal of rust,ruffling,mattering,paint removal,and processing wood. Advantage:Corrosion protection thanks to brass-plated wire

Bit houder, 1/4, 11 mm, lengte: 75 mm

The spanner is used for tightening all discs on angle grinders and straight grinders GGS 6 S Professional. Straight spanner for tightening all discs on two-handed angle grinders and straight grinders

It is compatible with a 28 mm hexagonal shaft system for rotary hammers. The pointed chisel has a tapered tip for precise fitting work in concrete. It is intended for use in concrete and brick for chiseling, demolition, and fitting work, including renovation of joints and clearing reinforcements. Pointed chisel with tip for precise fitting work in concrete

Flat chisels can be used for standard chiseling for various demolition tasks in concrete and bricks. The flat cutting edge of the chisel enables good material removal for lighter tasks. The chisel is intended for grooving, demolition, adaptation work as well as renovation of joints and clearing reinforcements. Flat chisel, which can be used for standard chiseling for various demolition tasks in concrete and bricks

It is compatible with a 28 mm hexagonal shaft system for rotary hammers. The asphalt cutter is ideal for targeted breaking up of road surfaces. The chisel's wide and straight blade is designed to cut through asphalt, making it also ideal for repairing asphalt wear layers. Asphalt cutter, which is ideal for targeted breaking up of road surfaces

Bosch

It has an SDS plus shaft and is designed for all hammer drills with SDS plus fittings. The universal holder with quick release makes it easy to change bits and holds the bit extra securely during universal use of screwdrivers. A permanent magnet ensures a firm and secure grip on the bits during use. In addition, a quick release function on the drill chuck allows for quick and easy bit changes, increasing the firm grip on the bit. The universal holder is suitable for all fastening jobs that require power tools.Universal holder with quick-change chuck and permanent magnet

Boor, voor beton, metselwerk, gewapend beton, 6 mm, SDS-plus, lengte: 215 mm