Bosch (34.620)

Boor, spiraalboor, 10 mm, cilindrisch, lengte: 400 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck. Total length: 400 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling in multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck. Total length: 400 mm

Boor, voor hout en metaal, spiraalboor, 8 mm, cilindrisch, lengte: 600 mm

Boor, spiraalboor, 10 mm, cilindrisch, lengte: 600 mm

Boor, kegelboor, 12 mm, cilindrisch, lengte: 600 mm

Boor, spiraalboor, 14 mm, cilindrisch, lengte: 600 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck. Total length: 600 mm

It is suitable for use on wood, plastic, and non-ferrous metals and has a cylindrical shaft system. The HSS countersink drill bit with a cylindrical shaft provides smooth countersinking for screws and deburring of holes in soft materials. The ground countersink drill bit is made of HSS (high-speed steel), which provides optimal surface quality for even work on smooth surfaces. Outstanding results in soft materials thanks to the 90-degree cutting edges that continuously function free of splinters and without leaving burrs

It is suitable for use on wood, plastic, and non-ferrous metals and has a cylindrical shaft system. The HSS countersink drill bit with a cylindrical shaft provides smooth countersinking for screws and deburring of holes in soft materials. The ground countersink drill bit is made of HSS (high-speed steel), which provides optimal surface quality for even work on smooth surfaces. Outstanding results in soft materials thanks to the 90-degree cutting edges that continuously function free of splinters and without leaving burrs

Boor, voor hout, centreerpuntboor, 4 mm, lengte: 70 mm

Boor, voor hout, centreerpuntboor, 5 mm, lengte: 85 mm

Boor, voor hout, centreerpuntboor, 6 mm, lengte: 90 mm

The dowel drill bit with a countersink effectively drills, countersinks, and chamfers in one step in wood. Mounted on a dowel drilling head, it solves all three tasks cheaply and efficiently. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards, and plywood. This multifunctional bit made of tool steel has a 90-degree countersinking angle, five cutting edges, and can also be used as a depth stop. The countersink comes with a hex key, dowel drilling head, and holder-mounted countersink. The countersink is intended for drill stands and screwdrivers.

Boor, voor hout, centreerpuntboor, 8 mm, lengte: 110 mm

Boor, voor hout, centreerpuntboor, 12 mm, lengte: 140 mm

De spantang houdt frezen vast. Er moet altijd een spantang van de juiste grootte worden gebruikt om risico's tijdens het gebruik te voorkomen. Gebruik geen schachthulzen. Diameter mm: 6,00,...

Spantang, 6.35 mm

De spantang houdt frezen vast. Er moet altijd een spantang van de juiste grootte worden gebruikt om risico's tijdens het gebruik te voorkomen. Gebruik geen schachthulzen. Diameter mm: 8,00,...

Collet, 35,5 mm, breedte: 24 mm

Bij het frezen loopt de kopieerhuls langs de contour van het sjabloon. Daardoor draagt hij vormen over op het werkstuk. Onmisbaar bij het werken met sjablonen. De bajonetsluiting maakt een snelle...

Sjabloon gids, 17 mm

Bij het frezen loopt de kopieerhuls langs de contour van het sjabloon. Daardoor draagt hij vormen over op het werkstuk. Onmisbaar bij het werken met sjablonen. De bajonetsluiting maakt een snelle...

They are intended for use with parallel guide 2 607 001 387 and router circle cutter 2 609 200 143 and are suitable for routers. The extra-long guide rods extend up to 800 mm when greater length is required. Guide rod Fits all routers with a guide rod diameter of 10 mm, hole spacing of100 mm

Designed for planers and multi-sanders. The adapter is an accessory for connecting the vacuum cleaner hose to the power tool. Adapter for eccentric and multi-sanders as well as polishing machines

Schuurschijven voor excentrische schuurmachines zijn bedoeld voor het schuren van lak, plamuur en pleister. De verschillende verkrijgbare hardheidsniveaus zijn afgestemd op het materiaal en het...

Boorstift, spiraalboor, 5 stuks, 6 mm, cilindrisch, lengte: 139 mm

Beitel, voor beton, metselwerk, winged gouge, SDS-max, lengte: 380 mm, breedte: 35 mm

Bosch

It is intended for use with triangular sanders and oscillating multi-tools. The sheepskin is suitable for cleaning and polishing various surfaces as well as highlighting wood grain for a rustic look, rust removal from metal, and matte sanding of painted surfaces. It is intended for use with triangular sanders and oscillating multi-tools. Clean skin without abrasive Suitable for removing dirt and deposits without changing the surface of the object. Work without abrasive - may leave small scratches in soft material

It is suitable for use with delta sanders. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste. Polishing pad Suitable for pre-polishing heavily soiled or scratched surfaces - when using a polishing agent or abrasive paste on smooth surfaces

Expert for Inox cutting disc provides efficient cutting in Inox with maximum safety. The disc is made of first-class hard aluminum oxide with functional fillers and additives that reduce the heat generated during cutting. This provides high-quality surface results and ensures a long lifespan for the disc. Additionally, the disc does not contain iron, sulfur or chlorine-containing fillers. Maximum work safety is ensured with precision-produced fiberglass mesh. Use this disc for cutting Inox. Bosch cutting discs comply with maximum safety requirements according to EN 12413, FEPA and oSa standards. The disc is compatible with angle grinders. Straight

The conical grinding cups provide a long lifespan when grinding metal and cast iron. Its high-quality aluminum oxide abrasive grain with synthetic resin bonding is designed for durability in metal applications. It is intended for grinding metal and cast iron. The best results and the greatest safety are achieved by using the conical grinding cups only with two-handed angle grinders with a maximum speed of 8500 o o/min. It is suitable for use with two-handed angle grinders with a maximum speed of 8500 o o/min

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers. Package of 1 piece.

It is intended for delta sanders of the type GDA280 E Professional, PDA180, PDA180E, PDA240E and PSM160A. The Velcro closure is an accessory for attaching sanding discs to the flap sander attachment for delta sanders. Spare material with Velcro for flap sander paper attachment

Flap wheel, for wood, metal, polyvinyl chloride (PVC), 60 mm, width: 40 mm, grit: P60