Bosch (34.620)

Boor, voor zacht hout, hardhout, brad point boor, 20 mm, cilindrisch, lengte: 200 mm

The fine wire staples fit staplers from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread. Cup Steel Brush - Corrugated Wire, Brass Plated Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer. Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional Advantage: Corrosion protection thanks to brass-plated wire.

The professional hole cutter is easy to handle, making it perfect for cutting air ducts and ventilation pipes as well as installing contact cabinets and junction boxes. It comes in different diameters and with a holder and centering drill. The teeth are hardened and finely tuned for tasks with different types of metal, making this professional hole cutter easy to use. The hole cutter is suitable for working with non-ferrous metals such as aluminum and copper as well as wood and plastic. Saw blade Medium-fine toothing. Particularly suitable for drilling holes such as for contacts and distribution boxes. The tool holder is firmly connected to the base body, making it particularly robust with optimal concentricity. Working length 28 mm

Bosch

Drill bit, for wood, metal, twist bit, 22 mm, SDS-plus, length: 400 mm

Bosch

HSS countersink drill head with hexagonal shank creates smooth countersinks for screws and deburrs holes in hard materials. The ground countersink drill head made of HSS (high-speed steel) has an optimal surface quality for even work. Outstanding results in hard materials are possible thanks to three 90-degree cutting edges that function continuously, without vibrations or burrs. High power transmission due to the hexagonal shaft provides a flat hole sink. It is suitable for use on non-ferrous metals, steel, and cast iron and has a hexagonal shank system for versatile use. The HSS countersink drill head with hexagonal shank is manufactured according to DIN 335. The best result is achieved by working at low cutting speeds. It can also be used with impact wrenches.

The HSS countersink drill bit with a cylindrical shaft provides even countersinking for screws and deburring of holes in hard materials. The ground countersink drill bit is made of HSS (high-speed steel) and provides optimal surface quality for easy work on hard materials. Three 90-degree cutting edges continuously deliver outstanding vibration- and burr-free results when cutting through hard surfaces. The HSS countersink drill bit is manufactured according to DIN 335. The best result is achieved by working at low cutting speed. It is suitable for use on non-ferrous metals, steel, and cast iron and has a cylindrical shaft system

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel. 9 steps Ø 4-6-8-10-12-14-16-18-20 mm

De getrapte HSS-boor boort glad en braamvrij gaten met verschillende diameters. Hij is ideaal voor het boren en vergroten van gaten. Markeren is niet nodig, omdat de boorpunt met kruisgeslepen punt...

The HSS Sheet Metal cone drill head drills large holes with high precision in metal. Its self-centering two-part tip achieves perfect centering without wandering and spot drilling in thin-walled material. This precision-ground drill head has a straight flute for smooth drilling with optimal cutting. Use this product for drilling large holes in thin materials such as sheet metal, profiles, and pipes without pilot drilling. It is also ideal for deburring and enlarging existing holes without friction relief and works with non-ferrous metals, sheet metal, and plastic. The cone drill head's 1/4 inch hexagonal shank ensures high power transmission and allows for quick change of the drill head. It has a hexagonal shank system for versatile use and can also be used with screwdrivers.

Bosch

Bosch

Designed for Bosch belt sanders. The sanding sole provides an optimal sanding pattern suitable for very soft sanding. The instruction manual should be read before using the sanding sole. Fine grinding plate with graphite backing

De lamellenschuurschijf is een vervangingsonderdeel voor deltaschuurmachines. Hij is geschikt voor de modellen GDA280 E Professional, PDA180, PDA180E, PDA240E, PSM160A en Ventaro 1400....

De schuurschijf met klittenbandbevestiging is een reserveschuurschijf die geschikt is voor standaardwerkzaamheden. Hij is geschikt voor de vlakschuurmachines van Bosch. Breedte, blad mm: 93,...

Bosch 2 608 000 204 sander accessory 1 pc(s) Sanding sheet

Slijpschijf, voor metaal, 115 mm

Slijpschijf, voor metaal, 125 mm

Slijpschijf, voor metaal, 125 mm

Expert for Metal cutting disc provides efficient cutting in metal with maximum safety. The disc is made of first-class aluminum oxide with advanced phenolic resin for demanding work and delivers good results. In addition, the precision-produced fiberglass mesh of the disc ensures high stability, durability, and safety during cutting. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413, FEPA, and oSa. The disc is compatible with angle grinders. Deformed

It is suitable for use with handheld angle grinders. Expert for Metal scrubbing discs provide an impressive long service life on metal with maximum safety. Its premium abrasive grain of aluminum oxide, selected functional fillers and additives in a modern phenolic resin bonding matrix are particularly suitable for metal applications. In addition, its precision-manufactured glass fiber textile ensures particularly high disc stability and maximum work safety. It is intended for grinding on metal

It is made of lightweight plastic. For sanders. The plastic transport case is used for safe storage and transportation of Bosch Power Tools. Transport case

Het Bosch T 101 B decoupeerzaagblad is uw precieze oplossing voor zachte materialen. Het geslepen ontwerp en de hoge compatibiliteit met toonaangevende decoupeerzaagmerken maken het een onmisbaar gereedschap in de handel en industrie. Uitstekende zaagprestaties Met een tandlengte van 74 mm zorgt de Bosch T 101 B voor zuivere en precieze zaagsneden in zacht hout, spaanplaat, blokplaat en kunststoffen. De tandsteek van 2,7 mm biedt een optimale zaagkwaliteit voor een breed toepassingsgebied. Veelzijdige toepassingsmogelijkheden Of je nu vezelplaat of epoxy bewerkt, dit zaagblad is ideaal voor materiaaldiktes tussen 3 en 30 mm. Het past naadloos in decoupeerzagen van gerenommeerde merken zoals Bosch, DeWalt, Festool en nog veel meer.Robuust materiaalHet zaagblad is gemaakt van hoogwaardig HCS-staal en staat voor duurzaamheid en weerstand. Het geslepen ontwerp zorgt voor een lange levensduur en efficiëntie bij elk gebruik.Belangrijke details:Compacte tandsteek: 2,7 mmTotale lengte: 100 mmHoeveelheid per kaart: 25 stuksMateriaal: HCS staalToepassingsgebied: Naaldhout tot epoxy (3-30 mm)

For use with jigsaws featuring fastening systems with T-shanks. The T 144 D Speed for Wood jigsaw blade provides quick straight cuts in wood. Its sharp, set teeth shape delivers rapid results. HCS material (high carbon steel) is suitable for softwood and non-abrasive woodworking materials. Additionally, the large progressive tooth pitch (4-5.2 mm) enables the blade to cut through many different wood materials ranging from 5-50 mm in thickness. T 144 D HCS, set, sharpened Softwood (5-50 mm), chipboard, furniture board, fibreboard

Decoupeerzaagblad T 101 AIF Clean voor hard hout. Het decoupeerzaagblad T 101 AIF Clean for Hard Wood maakt zuivere rechte zaagsneden in hout. De nauwkeurig geslepen tanden met conisch geslepen lichaam snijden zuiver. De geharde HSS (high speed steel) en BIM (bi-metal) tandbalk is versterkt met HCS (koolstofstaal) met een hoge veerkracht - waardoor het blad geschikt is voor het zagen van harde materialen - zoals hardhout en abrasieve houtmaterialen. Het blad met spitse tanden vermindert het uitscheuren. Hij is uitgerust met een fijne tandsteek (1,7 mm) - voor het zagen van massief hout met een dikte van 2 tot 30 mm. Voor gebruik met decoupeerzagen met T-as bevestiging. Schacht met één nok - zuivere snede. Inhoud van de verkoopverpakking: 3 stuks.Verdere technische kenmerken:- Aantal per kaart:3- Ontwerp: Puntig, vrij-hoekig, tand-geslepen.

Het T 345 XF Progressor for Wood and Metal decoupeerzaagblad is bijzonder robuust voor snelle rechte zaagsneden in dun en dik hout met metaal. De tandgeometrie met progressief oplopende tandafstand...

Zaagblad, voor plaatijzer, profielen, leidingen, 5 stuks, lengte: 100 mm

Bosch 2608638474 Decoupeerzaagblad Snelstaal (HSS) 25 stuk(s)

Bosch

Snelspanboorkop, SDS-plus

Bosch

Bosch

Doosboor SDS-max-9 Core Cutter, eendelig, diameter x werklengte x totale lengte: 82 x 160 x 290 mm, aantal boorplaatjes 8, geschikt voor beton, metselwerk en kalkzandsteen, eendelige uitvoering...

Expert for Metal cutting disc provides efficient cutting in metal with maximum safety. The disc is made of first-class aluminum oxide with advanced phenolic resin for demanding work and delivers good results. In addition, the disc's precision-manufactured fiberglass mesh ensures high stability, durability, and safety during cutting. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413, FEPA, and oSa. The disc is compatible with angle grinders. Straight