Bosch (34.857)

Bosch

Het T 119 BO Basic for Wood decoupeerzaagblad maakt gebogen zaagsneden in hout. De gefreesde, gegolfde tanden zijn ideaal voor zaagsneden zonder speciale eisen. Het smalle blad is geoptimaliseerd voor gebogen zaagsneden. Het blad van koolstofstaal is geschikt voor zacht hout en niet-abrasieve houtmaterialen. De fijne tandafstand (2 mm) maakt het snijden van dun houtmateriaal met een dikte van 2-15 mm mogelijk. Voor gebruik met decoupeerzagen met T-schachtbevestiging. Materiaal: HCS, uitvoering tanden: gegolfd, gefreesd, totale lengte [mm]: 83, tandafstand [mm]: 2,0, toepassingen: zacht hout (2-15 mm), multiplex, spaan-, meubel-, vezelplaat, speciaal voor gebogen zaagsneden, type: T 119 BO.

Bosch

Bosch

The SDS plus-5 drill bit guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers. Package of 1 piece.

Bosch

Boor, voor beton, metselwerk, hamerboor, 8 mm, SDS-plus, lengte: 615 mm

It has a safety feature to prevent accidental triggering. The handle fits all Bosch two-handed angle grinders. The loop handle can be mounted in two ways to accommodate both left and right-handed users. Loop handle

The Standard for Metal cutting disc provides reliable cutting in metal. The aluminum oxide disc is developed for general use with metal. Use this disc for cutting in metal. Bosch cutting discs comply with the maximum safety requirements according to EN 12413. The disc is compatible with angle grinders. Straight

Bosch

Bosch

Boor, voor zacht hout, hardhout, brad point boor, 12 mm, cilindrisch, lengte: 151 mm

Bosch

Bosch

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling in multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck. Total length: 400 mm

Boor, spiraalboor, 10 mm, cilindrisch, lengte: 600 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck. Total length: 600 mm

Bosch

Bosch

Bosch

Bosch

Bosch

Bosch

Bosch

Universeel menggereedschap voor handbediende mengmachines of boormachines met boorkophouder van verschillende fabrikanten. Geschikt voor kant-en-klaar pleister, beton, mortel, zandcement. Mengwerking van beneden naar boven. M 14-buitendraad. 135 mm, 590 mm, 25-40 kg.

Designed for Bosch vacuum cleaners. The vacuum cleaner hose is designed for connection to Bosch vacuum cleaners. Hose

Opmerking: het wordt aanbevolen de bijpassende spantang voor de diameter van de freesschacht te gebruiken en niet met schachthulzen te werken. Spantang. 3/8”, 27 mm.

Bosch

Bosch

Bosch

Bosch

Bosch

Bosch

Bosch

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers Package of 5 pieces.

HSS countersink drill head with hexagonal shaft creates smooth countersinks for screws and deburring of holes in hard materials. The ground countersink drill head made of HSS (high-speed steel) has an optimal surface quality for even work. Outstanding results in hard materials are possible thanks to three 90-degree cutting edges that function continuously, without vibrations or burrs. High power transmission thanks to the hexagonal shaft provides a flat hole sink. It is suitable for use on non-ferrous metals, steel, and cast iron and has a hexagonal shaft system for versatile use. The HSS countersink drill head with hexagonal shank is manufactured according to DIN 335. The best result is achieved by working at low cutting speeds. It can also be used with impact wrenches