Bosch Diamond for Hard Ceramics diamantboor nat 10mm
* Geschikt voor zachte tot zeer harde (vloer)tegels * Alleen voor gebruik met accu boormachines, altijd koelen met water * Niet geschikt voor klopboren
1 aanbieding
€ 16,80
Bosch vind je terug in onze catalogus met onderdelen en gereedschappen voor motorvoertuigen en huishoudelijke toepassingen. Op deze pagina bekijk je het aanbod per categorie, zodat je snel ziet waar jouw klus of reparatie om vraagt. Je kunt dus gericht filteren op functie. Daardoor beperk je het zoeken tot wat past bij jouw situatie.
* Geschikt voor zachte tot zeer harde (vloer)tegels * Alleen voor gebruik met accu boormachines, altijd koelen met water * Niet geschikt voor klopboren
1 aanbieding
€ 16,80
Bosch
1 aanbieding
€ 39,99
Bosch
1 aanbieding
€ 41,00
Click system for secure locking. The hood fits angle grinders. The protective shield is intended for general scrubbing and grinding work and is equipped with a cover plate for cutting. Protective caps with cover plate for cutting Tool-free installation
1 aanbieding
€ 12,54
De greep is geschikt voor links- en rechtshandigen. Hij is compatibel met alle kleine haakse slijpers van Bosch en bandschuurmachines met een M10-schroefdraad. Geschikt voor: PWS 700-115; PWS 720-115; PWS 720-125; PWS 750-115; PWS 750-125.
1 aanbieding
€ 5,99
Bosch
1 aanbieding
€ 34,95
Bosch
1 aanbieding
€ 225,50
Bosch
1 aanbieding
€ 41,99
Bosch Accessories 2607019904 Hamerboorset 1 stuk(s)
1 aanbieding
€ 27,99
Bosch
1 aanbieding
€ 64,90
Zaagblad, voor zacht hout, niet-schurende houtmaterialen, 25 stuks, lengte: 200 mm, breedte: 19 mm
1 aanbieding
€ 79,00
Boorset, 5 stuks, 5 mm, 6 mm, 8 mm, 10 mm, SDS-plus, lengte: 115 mm, 165 mm
1 aanbieding
€ 21,79
Bosch
1 aanbieding
€ 14,54
Bosch
1 aanbieding
€ 14,39
Bosch
1 aanbieding
€ 14,99
Bosch
1 aanbieding
€ 16,49
Bosch
1 aanbieding
€ 19,34
Bosch
1 aanbieding
€ 18,95
Bosch
1 aanbieding
€ 16,99
Bosch
1 aanbieding
€ 19,99
Bosch
1 aanbieding
€ 21,00
Bosch
1 aanbieding
€ 21,00
Bosch
1 aanbieding
€ 26,25
Bosch
1 aanbieding
€ 49,99
Details: - Diameter mm: 121 - Diameter inches: 4 3/4 - Working length: 38mm
1 aanbieding
€ 38,18
Bosch
1 aanbieding
€ 8,17
Bosch
1 aanbieding
€ 6,72
Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm
1 aanbieding
€ 8,78
Bosch
1 aanbieding
€ 5,65
Bosch
1 aanbieding
€ 5,09
The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers. Package with one piece.
1 aanbieding
€ 5,94
Bosch
1 aanbieding
€ 6,00
Bosch
1 aanbieding
€ 10,00
Bosch
1 aanbieding
€ 8,25
1x metaalboor HSS-Co 6,8x69x1
1 aanbieding
€ 6,79
The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers. Package with one piece.
1 aanbieding
€ 6,29
Wat vind je van deze pagina?
Bedankt voor je feedback!
In onze catalogus staat Bosch bij zowel voertuigen als werk in en om huis. Je vindt het aanbod in categorieën als brandstofsystemen voor motorvoertuigen en remmen voor motorvoertuigen. Daarnaast staan er onderdelen rond sensoren en meters voor motorvoertuigen.
Dat betekent dat je niet alleen op één type onderdeel uitkomt. Je vergelijkt bijvoorbeeld op aansturing en meting bij sensoren, of op remgedrag bij remmen. Ook kun je voor een klus aan huis kijken naar accessoires voor huishoudelijke apparaten.
Binnen dezelfde voertuigcategorie let je op andere technische kenmerken. Bij brandstofsystemen voor motorvoertuigen draait het vaak om compatibiliteit en type brandstofaanvoer. Denk ook aan drukregeling en aansluitvormen die wel of niet kloppen met je uitvoering. Dat bepaalt of een onderdeel direct past.
Bij remmen voor motorvoertuigen merk je verschil in remwerking en montage. Kijk naar remtype, bevestiging en maatvoering. Ook de staat van onderdelen die samenwerken maakt uit. Die combinatie bepaalt hoe soepel en veilig je remsysteem reageert.
Je kiest ook anders als je naar sensoren kijkt. Bij sensoren en meters voor motorvoertuigen staan meetbereik, signaaluitgang en plaatsing centraal. Een sensor met verkeerde aansluitklem of spanning geeft sneller problemen. Kies daarom op specificaties, niet op naam.
Naast onderdelen vind je Bosch ook terug in werkgereedschap, zoals handboormachines en zagen. Bij handboormachines vergelijken kopers vooral op koppelinstellingen en boorcapaciteit. Let ook op ergonomie en schakelopbouw, omdat dat bepaalt hoe lang je doorwerkt. Verder maakt de opspanwijze het verschil bij het wisselen van bits.
Bij zagen kijkt men doorgaans naar zaagbladtype en snijrichting. Let ook op diepte-instelling en afzuigmogelijkheden, want die sturen je zaagkwaliteit aan. Een passende bladmaat scheelt veel in pasvorm.