Gereedschapaccessoires (10.000)

R574 Best for Metal has an exceptional lifespan when grinding rough surfaces, deburring, removing welds and rust removal on metal surfaces. Robust and long-lasting abrasive surface coated with zirconia aluminum/semi-fused aluminum oxide grains. The backing material is made of vulcanized rubber, which ensures stability despite long-term work. The abrasive grain is attached using a 100% synthetic resin bond, ensuring exceptional durability for tough tasks. R574 Best for Metal is intended for angle grinders and drills

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding on wood, wood-based materials, veneer as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, varnish, putty as well as roughening and fine grinding feather edges, primer coats or putty. The sheet is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks. 5 m

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding of wood, wood-based materials, veneers as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, lacquer, putty as well as roughening and fine grinding feather edges, primer coats or putty. The blade is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding on wood, wood-based materials, veneer as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, varnish, putty as well as roughening and fine grinding feather edges, primer coats or putty. The sheet is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks. 5 m

Precisie ontmoet veelzijdigheid met het BOSCH S 2345 X reciprozaagblad - uw onmisbare partner voor efficiënt werken in hout en kunststof.Hoogwaardig materiaalGemaakt van robuust HCS (High Carbon Steel), garandeert het BOSCH reciprozaagblad duurzaamheid en betrouwbaarheid bij elke zaagsnede. Het is speciaal ontwikkeld om de uitdagingen van constructiehout en plaatmaterialen aan te kunnen.Breed scala aan toepassingenDit zaagblad is ideaal voor een verscheidenheid aan materialen, waaronder constructiehout tot een dikte van 150 mm, spaanplaat en MDF-platen tussen 6 en 60 mm, en multiplex. Kunststoffen tot een dikte van 150 mm kunnen ook nauwkeurig worden verwerkt.Fijne zaagresultatenMet de gezette en geslepen tanden zorgt het sabelzaagblad voor een moeiteloze en fijne zaagsnede. De progressief ontworpen tanden kunnen snel worden aangepast aan een groot aantal materiaaldiktes, wat de efficiëntie aanzienlijk verhoogt.Praktische verpakkingseenheidDe verkoopverpakking bevat twee stuks van het krachtige zaagblad, zodat u over een praktische reserve beschikt en stilstand tot een minimum wordt beperkt.Belangrijke details:Moeiteloze & fijne zaagsnedeMateriaal: HCSLengte: 200 mmBreedte: 19 mmTandafstand (TPI): 6-10, dikte van de tanden: 2,5-4,3 mmVerpakkingseenheid: 2 stuks

Flap schijf, voor metaal, 125 mm, korrel: 40

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills. Package contains 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills. Package contains 1 piece.

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders. Package of 3 pieces.

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

Cirkelzaagblad, voor hout met spijkers, constructiehout met mortel en spijkers, 315 mm, 20 tanden

The set's blades are designed for jigsaws with a universal shank system. The 3-piece Progressor jigsaw blade set provides powerful cuts in thin and thick materials. The set's Progressor blades are for universal use and cut quickly through wood, plastic, and metal with a range of different densities. Jigsaw blade set with 3 pieces Universal and fast through thick and thin. For wood, plastic, and metal

Slijpschijf, voor metaal, roestvrij staal, 230 mm

They are intended for use on planers. Grinding plates for planers are designed for grinding paint, putty and plaster. They come in a range of different hardnesses depending on the material and desired surface result. Grinding plate

Bosch

It consists of two blades and four screws. The six-piece scissor blade set is a set with extra blades for Bosch slitting shears. Blade curve

The HLTCG tooth shape (High-Low Triple Chip Ground) gives the Expert for Multi Material circular saw blade strength to work with abrasive materials. The Multi Material circular saw blade provides powerful cuts in a wide range of materials. Its precision-ground high-quality carbide teeth make the blade strong enough to cut through many different materials, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in non-ferrous metals, aluminum, plastic, epoxy and wood.

Schuurband

For use with jigsaws featuring fastening systems with T-shanks. The T 101 BRF Clean for Hard Wood jigsaw blade provides clean, straight cuts in wood. Its precision-ground teeth with ground-tooth construction make clean cuts. The blade is made of bimetal (BIM), and its fully hardened HSS tooth list is attached to a high-elastic HCS (carbon steel) construction, making the blade suitable for cutting hard materials such as hardwood and abrasive woodworking materials. In addition, it features reve...

They are suitable for jigsaws with U-shafts (universal shafts) of all brands of power tools. The U 101 BF Clean for Hard Wood jigsaw blade provides clean, straight cuts in wood. Its precision ground teeth with tooth-ground construction make clean cuts. It is made of BIM (bimetal), and its fully hardened HSS (high-speed steel) tooth list is attached to a high-elastic HCS (carbon-rich steel) construction, making the blade suitable for cutting hard materials such as hard wood and abrasive woodworking materials. It features a fine progressive tooth height (2.7 mm) and cuts a wide range of wood materials from 3-30 mm thick. U 101 BF BIM, ground bevelled and tooth-ground Hardwood, softwood, GFK/epoxy (3-30 mm), laminated boards/HPL

X571 Best for Metal is compatible with angle grinders. X571 Best for Metal has exceptional lifespan when grinding welds and rough grinding metal surfaces. Robust and long-lasting abrasive surface coated with zirconia alumina/semi-friable aluminum oxide grains for extensive metal grinding. The product is intended for metal grinding. The abrasive grain is attached using a 100% synthetic resin bond that ensures high wear resistance for tough tasks, on a durable X-cloth backing material. The backing pad is available in angled and straight versions, as well as in fiberglass and plastic versions

Fabrikant: BOSCH. Fabrikant nr.: 2 608 607 322. Index: 2 608 607 322.

X571 Best for Metal is compatible with angle grinders. X571 Best for Metal has exceptional lifespan when grinding welds and rough grinding metal surfaces. Robust and long-lasting abrasive surface coated with zirconia alumina/semi-friable aluminum oxide grains for extensive metal grinding. The product is intended for metal grinding. The abrasive grain is attached using a 100% synthetic resin bond that ensures high wear resistance for tough tasks, on a durable X-cloth backing material. The backing pad is available in angled and straight versions, as well as in fiberglass and plastic versions

X551 Expert for Metal has an impressive speed for material removal on metal surfaces. The blend of zirconia aluminum/semi-friable aluminum oxide grains ensures excellent removal rate and lifespan in connection with metal surfaces. The extremely robust X-cloth with stable backing material ensures long durability and consistent results, even in tough tasks. The abrasive grain is attached using a 100% synthetic resin bond on X-cloth, ensuring optimal grinding. It is intended for deburring and weld preparation on carbon steel, soft steel, aluminum, non-ferrous metals and cast iron. It is also suitable for removing discoloration, chips and surface defects. Available in angled and straight versions as well as fiberglass and plastic versions. X551 Expert for Metal is compatible with angle grinders.

Bosch Bit extra-hard

Bosch Bit extra-hard

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

A double-ended tip increases the value for the user because it can be combined with different or identical head types. It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

Designed for use with miter saws. The dust bag is an accessory for collecting sawdust. Dust bag

The movable plate must always be mounted during use. The movable plate is a spare plate for table saws. Movable plate

Intended for use with miter saws. The dust bag is an accessory for collecting sawdust. Dust bag with adapter

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, carpenters, roofers, and is suitable for both softwood and hardwood.Spiral drill set with 6 pieces

Hamerboor (SDS plus) met een diameter van 5.5 mm en een werklengte van 50 mm, ontworpen voor boren in steen, metselwerk, graniet, beton en gewapend beton. Bosch Hammer Drill Bit SDS plus levert een stevige SDS plus-passing en een totale lengte van 110 mm, waardoor hij zeer geschikt is voor nauwkeurige boortaken in taaie minerale materialen.

Boorhamerboor SDS plus met 9 mm diameter, 100 mm werklengte en 160 mm totale lengte, ontworpen voor boren in steen, metselwerk, graniet, beton en gewapend beton. Hamerboor SDS plus is een SDS plus boorhamerboor die geschikt is voor harde minerale materialen, met specificaties van 9 mm diameter, 100 mm werklengte en 160 mm totale lengte voor gecontroleerde boordiepte en bereik.

Hamerboor met SDS plus-schacht, 14 mm diameter, 100 mm werklengte en 160 mm totale lengte voor het boren in steen, metselwerk, graniet, beton en gewapend beton. Bosch Hammer Drill Bit SDS plus is ontworpen voor SDS plus-boorhamers en geschikt voor een breed scala aan harde materialen, van steen en metselwerk tot beton en gewapend beton.