Elektronica (10.000)

Schermbeschermer biedt volledige, volledig klevende bescherming van gehard glas met een 3D-design voor Samsung Galaxy A16, A17 en A26. CRONG 3D Armour Glass Lite (model CRG3DAGLSGA26) is een bescherming voor het scherm en de achterkant van je telefoon, ontworpen om je toestel te bedekken en te beschermen met duurzaam gehard glas. Volledig klevend gehard glas 3D Armour Glass Lite-design Compatibel met Samsung Galaxy A16 / A17 / A26 Bevat 1 stuk Gemaakt om je Galaxy-scherm tijdens dagelijks gebruik beschermd te houden, met behoud van een strakke, passend aangebrachte look.

Schermbeschermer biedt volledige, volledig klevende bescherming van gehard glas met 3D-dekking in de CRONG 3D Armour Glass Lite voor Samsung Galaxy S25. CRONG CRG3DAGLSGS25 is een set scherm- en achterkantbeschermer voor mobiele telefoon, ontworpen om je Samsung Galaxy S25 te helpen beschermen met een gehardglasoplossing voor nauwkeurige pasvorm en dagelijks gebruik. Bescherming van gehard glas Volledig klevende applicatie 3D Armour Glass Lite-design Gemaakt voor Samsung Galaxy S25 1-delige verpakking Gemaakt om je telefoon beschermd te houden, met behoud van een strak, naadloos gevoel op het toestel.

Gehard glazen screenprotector CRONG 3D Armour Glass Lite met volledige, volledig klevende 3D-dekking is gemaakt voor Samsung Galaxy S25 Ultra. Ontworpen als scherm- en achterkantbeschermer voor mobiele telefoon helpt dit CRONG-glas je Samsung Galaxy S25 Ultra beschermd te houden, terwijl de look en feel van je toestel behouden blijven. Volledig klevend gehard glas 3D Armour Glass Lite-design Voor Samsung Galaxy S25 Ultra Bescherming voor scherm en achterkant Eenvoudige, modelspecifieke bescherming die past bij je Galaxy S25 Ultra-configuratie.

Scherm- en achterkantbeschermer biedt volledige, volledig klevende bescherming van gehard glas met een 3D Armor Glass Lite-design voor Samsung Galaxy A36, A37, A56, A57, S24 FE en S25 FE. CRONG 3D Armor Glass Lite (model CRG3DAGLSGS25FE) is een set beschermglas voor mobiele telefoon, ontworpen voor een nauwkeurige pasvorm op meerdere Galaxy-modellen, geleverd als 1 stuk voor eenvoudige dekking. Volledig klevend gehard glas 3D Armor Glass Lite-serie Compatibel met Samsung Galaxy A36 / A37 / A56 / A57 / S24 FE / S25 FE Bescherming voor scherm en achterkant 1-delige verpakking Ideaal om je Samsung Galaxy te beschermen met een strakke, nauwsluitende glaslaag.

Schermbeschermer biedt volledige, volledig klevende bescherming van gehard glas met een 3D-pasvorm voor Samsung Galaxy S26 in de CRONG 3D Armour Glass Lite-serie. CRONG 3D Armour Glass Lite (model CRG3DAGLSGS26) is een set scherm- en achterkantbeschermer voor mobiele telefoon, ontworpen om je Samsung Galaxy S26 te bedekken en te beschermen met duurzaam gehard glas en volledig klevende installatie. Volledig klevend gehard glas 3D Armour Glass Lite-design Gemaakt voor Samsung Galaxy S26 Bevat 1 stuk Bescherming voor scherm en achterkant Betrouwbare bescherming voor elke dag die helpt je Galaxy S26 tijdens dagelijks gebruik er strakker uit te laten zien en beter te beschermen.

Gehard glazen screenprotector CRONG 3D Armour Glass Lite met volledige lijmlaag voor Samsung Galaxy S26+ biedt nauwkeurige bescherming van rand tot rand voor je telefoondisplay. Ontworpen voor Samsung Galaxy S26+ helpt dit CRONG-beschermglas het scherm te beschermen tegen dagelijkse slijtage, terwijl de aanraakrespons en kijkhelderheid behouden blijven. Model: CRG3DAGLSGS26P Volledig klevende applicatie 3D Armour Glass Lite gehard glas Schermbeschermer voor Samsung Galaxy S26+ 1 stuk Praktische schermbescherming die stevig op je Galaxy S26+ past voor dagelijks gebruik.

Schermbeschermer biedt volledige, volledig klevende bescherming van gehard glas met 3D-dekking in de CRONG 3D Armour Glass Lite-serie voor Samsung Galaxy S26 Ultra. CRONG CRG3DAGLSGS26U is een set scherm- en achterkantbeschermer voor mobiele telefoon, ontworpen om je Samsung Galaxy S26 Ultra te helpen beschermen met duurzaam gehard glas. Volledig klevend gehard glas 3D Armour Glass Lite-design Gemaakt voor Samsung Galaxy S26 Ultra Bevat 1 stuk Betrouwbare bescherming die helpt de oppervlakken van je telefoon tijdens dagelijks gebruik beschermd te houden.

Schermbeschermer combineert 3D volledig klevende bescherming van gehard glas in het Armor Glass Lite-design voor Xiaomi 15T / 15T Pro. CRONG 3D Armor Glass Lite is een gehardglazen beschermer, gemaakt voor Xiaomi 15T en 15T Pro, ontworpen om het telefoonscherm te bedekken en te beschermen met volledige kleeflaag voor een stevige pasvorm. Compatibiliteit: Xiaomi 15T / 15T Pro Type: Full Glue Tempered Glass Serie: 3D Armor Glass Lite Merk: CRONG Betrouwbare dagelijkse schermbescherming, afgestemd op je Xiaomi-telefoon.

Geharde glazen screenprotector biedt 3D Armour Glass Lite full-glue dekking voor Xiaomi Redmi 15 5G. CRONG CRG3DAGLXMR15 screen- en achterzijdebeschermer voor mobiele telefoon is ontworpen om je apparaat te helpen beschermen met een precieze pasvorm, gemaakt voor Xiaomi Redmi 15 5G. Full-glue ontwerp van gehard glas Compatibel met Xiaomi Redmi 15 5G Bevat 1 stuk CRONG 3D Armour Glass Lite-serie Eenvoudige beschermingsinstallatie die helpt de oppervlakken van je telefoon in dagelijks gebruik beter te beschermen.

Schermbeschermer biedt volledige, volledig klevende bescherming van gehard glas met 3D-dekking voor Xiaomi 15 in de CRONG 3D Armour Glass Lite-serie. CRONG CRG3DAGLXM15 is een scherm- en achterkantbeschermer voor telefoon, ontworpen voor Xiaomi 15, geleverd als 1 stuk voor eenvoudige, nauwkeurige bescherming. Bescherming van gehard glas Volledig klevende applicatie Gemaakt voor Xiaomi 15 CRONG 3D Armour Glass Lite-model 1-delige verpakking Helpt je Xiaomi 15 beschermd te houden met een passend glasoplossing, gemaakt voor dagelijks gebruik.

Scherm- en achterkantbeschermer CRONG 3D Armour Glass Lite biedt volledige, volledig klevende bescherming van gehard glas voor Xiaomi 17. Ontworpen voor Xiaomi 17: deze CRONG-beschermer wordt geleverd als een 1-delige oplossing om het scherm en de achterkant van je telefoon bedekt te houden, met behoud van een strakke, stevige pasvorm. Volledig klevende bescherming van gehard glas Compatibel met Xiaomi 17 Model: CRG3DAGLXM17 Type: scherm- en achterkantbeschermer voor mobiele telefoon Aantal: 1 pc Betrouwbare bescherming voor elke dag in een eenvoudige, telefoonspecifieke uitvoering.

Screen- en achterzijdebeschermer van gehard glas biedt full-glue 3D-bescherming voor Google Pixel 9 / 10 in de CRONG 3D Armour Glass Lite-serie. CRONG CRG3DAGLGPX10 is een beschermglasoplossing voor mobiele telefoons, ontworpen om je apparaat te bedekken en te beschermen, geleverd als 1 stuk. Full-glue gehard glas 3D Armour Glass Lite-ontwerp Voor Google Pixel 9 / 10 Bescherming voor scherm en achterkant 1 stuk in de verpakking Helpt de oppervlakken van je Pixel te beschermen met een pasvorm op maat voor de Google Pixel 9 / 10.

Screenprotector biedt full-glue bescherming van gehard glas met een 3D-pasvorm voor Google Pixel 9 Pro / 10 Pro. CRONG 3D Armour Glass Lite is ontworpen als screen- en achterzijdebeschermer voor mobiele telefoons en biedt een laag gehard glas die helpt de oppervlakken van je apparaat te beschermen, met behoud van een strakke, goed passende afwerking. Full Glue gehard glas 3D Armour Glass Lite-ontwerp Compatibel met Google Pixel 9 Pro / 10 Pro Bescherming voor scherm en achterkant voor mobiele telefoon Betrouwbare dagelijkse bescherming die helpt het scherm en de achterkant van je Pixel netjes en goed bedekt te houden.

Geharde glazen screenprotector biedt 3D Armour Glass Lite full-glue bescherming voor Google Pixel 9 Pro XL / 10 Pro XL. CRONG 3D Armour Glass Lite is een screen- en achterzijdebeschermer voor gebruik met mobiele telefoons, ontworpen voor een precieze pasvorm op compatibele Google Pixel-modellen. Full Glue ontwerp van gehard glas Compatibel met Google Pixel 9 Pro XL / 10 Pro XL Model: CRG3DAGLGPX10XL Verpakking bevat 1 pc Ontworpen om je telefoon te helpen beschermen met een strakke, volledige glasapplicatie met volledige dekking.

Screenprotector biedt edge-to-edge bescherming voor Google Pixel 10a met Full Glue-technologie, een breukbestendige coating en een elegante zwarte rand voor een naadloze pasvorm. CRONG 3D Armour Glass Lite is versterkt glas dat is ontworpen om je display te helpen beschermen tegen barsten en afbrokkelen, terwijl het de afgeronde randen van het scherm bedekt. De 2.5D gevormde randen minimaliseren onbedoeld loskomen en helpen voorkomen dat stof eronder komt, terwijl de lijmlaag over het volledige oppervlak de protector laat aansluiten op de voorkant van de telefoon als een origineel fabriekscomponent. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Breukbestendige coating voor bescherming tegen barsten en afbrokkelen Edge-to-Edge dekking inclusief afgeronde schermranden 2.5D gevormde randen om loskomen te verminderen en stof buiten te houden Full Glue-lijmlaag over het volledige oppervlak Zwarte rand voor een vloeiende overgang tussen glas en schermranden Strakke, geïntegreerde schermbescherming die de look en feel van je Google Pixel 10a behoudt.

Screenprotector biedt versterkte edge-to-edge glasbescherming voor OnePlus 15R met Full Glue-hechting, 2.5D gevormde randen en een elegante zwarte rand. CRONG 3D Armour Glass Lite is ontworpen om het volledige displayoppervlak te bedekken, inclusief afgeronde randen, terwijl de breukbestendige coating helpt beschermen tegen barsten en afbrokkelen en het risico vermindert dat stof eronder komt. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Breukbestendige coating Edge-to-edge dekking inclusief afgeronde schermranden 2.5D gevormde randen om onbedoeld loskomen te minimaliseren Full Glue-technologie met lijmlaag over het volledige oppervlak Zwarte rand voor een naadloze overgang naar de schermranden Geeft je OnePlus 15R een strakke, fabrieksachtige look en voegt duurzame dagelijkse schermbescherming toe.

Screenprotector CRONG 3D Armour Glass Lite voor OnePlus 15 heeft Full Glue-hechting, edge-to-edge dekking en een versterkt breukbestendig ontwerp. Deze heldere glazen screenprotector is ontworpen om het volledige displayoppervlak te beschermen, inclusief afgeronde randen, en gebruikt 2.5D gevormde randen om onbedoeld loskomen te helpen verminderen en te voorkomen dat stof eronder komt. Een elegante zwarte rand zorgt voor een naadloze overgang naar de schermranden, terwijl de lijmlaag over het volledige oppervlak helpt om aan te sluiten op de voorkant van de telefoon als een origineel fabriekscomponent. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Breukbestendige coating helpt beschermen tegen barsten en afbrokkelen Edge-to-Edge dekking voor het volledige display, inclusief afgeronde randen 2.5D gevormde randen helpen loskomen te minimaliseren en stofindringing te verminderen Full Glue-technologie met lijmlaag over het volledige oppervlak Zwarte rand voor een strakke, geïntegreerde look Betrouwbare, nauwsluitende schermbescherming die de look en feel van je OnePlus 15 behoudt.

Screenprotector biedt versterkte edge-to-edge glasbescherming voor Xiaomi 17 Ultra met Full Glue-lijmlaag en een naadloze zwarte rand. CRONG 3D Armour Glass Lite is ontworpen om het volledige displayoppervlak te bedekken, inclusief afgeronde randen, met 2.5D gevormde randen om onbedoeld loskomen te verminderen en te helpen voorkomen dat stof eronder komt. Een breukbestendige coating helpt het scherm te beschermen tegen barsten en afbrokkelen, terwijl Full Glue-technologie ervoor zorgt dat het glas aansluit op de voorkant van de telefoon voor een originele, fabrieksachtige look. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Edge-to-Edge dekking inclusief afgeronde schermranden 2.5D gevormde randen om loskomen en stofindringing te minimaliseren Breukbestendige coating voor bescherming tegen barsten en afbrokkelen Full Glue-lijmlaag over het volledige oppervlak Elegante zwarte rand voor een naadloze overgang Strakke, stevige pasvorm die het display beschermt en tegelijk de voorkant van de telefoon geïntegreerd en glad laat ogen.

Screenprotector biedt edge-to-edge dekking voor Xiaomi Redmi Note 15 Pro met Full Glue-hechting, 2.5D gevormde randen en een zwarte rand voor een naadloze pasvorm. CRONG 3D Armour Glass Lite is een heldere glazen screenprotector die is ontworpen om het volledige displayoppervlak te bedekken, inclusief afgeronde randen, terwijl de breukbestendige coating helpt beschermen tegen barsten en afbrokkelen. Het versterkte ontwerp is volgens opgave vier keer duurzamer dan standaard glas, en de lijmlaag over het volledige oppervlak helpt om aan te sluiten op de voorkant van de telefoon als een origineel fabriekscomponent. Edge-to-Edge bescherming inclusief afgeronde schermranden Full Glue-technologie met lijmlaag over het volledige oppervlak 2.5D gevormde randen om onbedoeld loskomen te verminderen en stof te helpen blokkeren Breukbestendige coating om te beschermen tegen barsten en afbrokkelen Elegante zwarte rand voor een vloeiende overgang naar de schermranden Strakke, geïntegreerde schermbescherming die de uitstraling van je Xiaomi Redmi Note 15 Pro behoudt.

aolion

3x apgo Hydrogel Screen Protector voor Garett Kids Essa 4G, Hydrogel Film, met positioneringslaag eenvoudige installatie De verkoper heeft de garantie dat zijn goederen voldoen aan alle toepasselijke regelgeving en worden alleen aangeboden als ze voldoen aan het Joom-beleid en de EU-regelgeving inzake de veiligheid en conformiteit van goederen

Take care of the protection of your DJI OSMO Action 2 sports camera and equip yourself with the best quality tempered glass set. With 9H hardness and rounded edges, they reliably protect the display and lens of the camera from scratches and other mechanical damage. The glass does not affect the image quality, so you can enjoy sharp images and vivid colors. The glass is resistant to dust ingress, leaving greasy stains and fingerprints.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Place the mounting frame with the glass on the watch screen - the glass will be perfectly centered. Remove the protective film from the top of the glass, then press the glass with your finger in the center of the screen to begin the adhesion process. 4) Remove the mounting frame. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free - without the risk of air bubbles and exposure to dust. The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass. Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone. * Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. INSTALLATION INSTRUCTIONS: 1. Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass. Done! Enjoy a perfectly applied screen protector.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass! Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise. INSTALLATION INSTRUCTION: 1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision. 2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles. 3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it. 4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved. 5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out. 6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass! Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise. INSTALLATION INSTRUCTION: 1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision. 2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles. 3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it. 4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved. 5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out. 6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Place the mounting frame with the glass on the watch screen - the glass will be perfectly centered. Remove the protective film from the top of the glass, then press the glass with your finger in the center of the screen to begin the adhesion process. 4) Remove the mounting frame. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.