Elektronica (3,3 miljoen)

Screenprotector biedt full-glue bescherming van gehard glas met een 3D-pasvorm voor Google Pixel 9 Pro / 10 Pro. CRONG 3D Armour Glass Lite is ontworpen als screen- en achterzijdebeschermer voor mobiele telefoons en biedt een laag gehard glas die helpt de oppervlakken van je apparaat te beschermen, met behoud van een strakke, goed passende afwerking. Full Glue gehard glas 3D Armour Glass Lite-ontwerp Compatibel met Google Pixel 9 Pro / 10 Pro Bescherming voor scherm en achterkant voor mobiele telefoon Betrouwbare dagelijkse bescherming die helpt het scherm en de achterkant van je Pixel netjes en goed bedekt te houden.

Geharde glazen screenprotector biedt 3D Armour Glass Lite full-glue bescherming voor Google Pixel 9 Pro XL / 10 Pro XL. CRONG 3D Armour Glass Lite is een screen- en achterzijdebeschermer voor gebruik met mobiele telefoons, ontworpen voor een precieze pasvorm op compatibele Google Pixel-modellen. Full Glue ontwerp van gehard glas Compatibel met Google Pixel 9 Pro XL / 10 Pro XL Model: CRG3DAGLGPX10XL Verpakking bevat 1 pc Ontworpen om je telefoon te helpen beschermen met een strakke, volledige glasapplicatie met volledige dekking.

Screenprotector biedt edge-to-edge bescherming voor Google Pixel 10a met Full Glue-technologie, een breukbestendige coating en een elegante zwarte rand voor een naadloze pasvorm. CRONG 3D Armour Glass Lite is versterkt glas dat is ontworpen om je display te helpen beschermen tegen barsten en afbrokkelen, terwijl het de afgeronde randen van het scherm bedekt. De 2.5D gevormde randen minimaliseren onbedoeld loskomen en helpen voorkomen dat stof eronder komt, terwijl de lijmlaag over het volledige oppervlak de protector laat aansluiten op de voorkant van de telefoon als een origineel fabriekscomponent. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Breukbestendige coating voor bescherming tegen barsten en afbrokkelen Edge-to-Edge dekking inclusief afgeronde schermranden 2.5D gevormde randen om loskomen te verminderen en stof buiten te houden Full Glue-lijmlaag over het volledige oppervlak Zwarte rand voor een vloeiende overgang tussen glas en schermranden Strakke, geïntegreerde schermbescherming die de look en feel van je Google Pixel 10a behoudt.

Screenprotector biedt versterkte edge-to-edge glasbescherming voor OnePlus 15R met Full Glue-hechting, 2.5D gevormde randen en een elegante zwarte rand. CRONG 3D Armour Glass Lite is ontworpen om het volledige displayoppervlak te bedekken, inclusief afgeronde randen, terwijl de breukbestendige coating helpt beschermen tegen barsten en afbrokkelen en het risico vermindert dat stof eronder komt. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Breukbestendige coating Edge-to-edge dekking inclusief afgeronde schermranden 2.5D gevormde randen om onbedoeld loskomen te minimaliseren Full Glue-technologie met lijmlaag over het volledige oppervlak Zwarte rand voor een naadloze overgang naar de schermranden Geeft je OnePlus 15R een strakke, fabrieksachtige look en voegt duurzame dagelijkse schermbescherming toe.

Screenprotector CRONG 3D Armour Glass Lite voor OnePlus 15 heeft Full Glue-hechting, edge-to-edge dekking en een versterkt breukbestendig ontwerp. Deze heldere glazen screenprotector is ontworpen om het volledige displayoppervlak te beschermen, inclusief afgeronde randen, en gebruikt 2.5D gevormde randen om onbedoeld loskomen te helpen verminderen en te voorkomen dat stof eronder komt. Een elegante zwarte rand zorgt voor een naadloze overgang naar de schermranden, terwijl de lijmlaag over het volledige oppervlak helpt om aan te sluiten op de voorkant van de telefoon als een origineel fabriekscomponent. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Breukbestendige coating helpt beschermen tegen barsten en afbrokkelen Edge-to-Edge dekking voor het volledige display, inclusief afgeronde randen 2.5D gevormde randen helpen loskomen te minimaliseren en stofindringing te verminderen Full Glue-technologie met lijmlaag over het volledige oppervlak Zwarte rand voor een strakke, geïntegreerde look Betrouwbare, nauwsluitende schermbescherming die de look en feel van je OnePlus 15 behoudt.

Screenprotector biedt versterkte edge-to-edge glasbescherming voor Xiaomi 17 Ultra met Full Glue-lijmlaag en een naadloze zwarte rand. CRONG 3D Armour Glass Lite is ontworpen om het volledige displayoppervlak te bedekken, inclusief afgeronde randen, met 2.5D gevormde randen om onbedoeld loskomen te verminderen en te helpen voorkomen dat stof eronder komt. Een breukbestendige coating helpt het scherm te beschermen tegen barsten en afbrokkelen, terwijl Full Glue-technologie ervoor zorgt dat het glas aansluit op de voorkant van de telefoon voor een originele, fabrieksachtige look. Versterkt ontwerp, aangegeven als vier keer duurzamer dan standaard glas Edge-to-Edge dekking inclusief afgeronde schermranden 2.5D gevormde randen om loskomen en stofindringing te minimaliseren Breukbestendige coating voor bescherming tegen barsten en afbrokkelen Full Glue-lijmlaag over het volledige oppervlak Elegante zwarte rand voor een naadloze overgang Strakke, stevige pasvorm die het display beschermt en tegelijk de voorkant van de telefoon geïntegreerd en glad laat ogen.

Screenprotector biedt edge-to-edge dekking voor Xiaomi Redmi Note 15 Pro met Full Glue-hechting, 2.5D gevormde randen en een zwarte rand voor een naadloze pasvorm. CRONG 3D Armour Glass Lite is een heldere glazen screenprotector die is ontworpen om het volledige displayoppervlak te bedekken, inclusief afgeronde randen, terwijl de breukbestendige coating helpt beschermen tegen barsten en afbrokkelen. Het versterkte ontwerp is volgens opgave vier keer duurzamer dan standaard glas, en de lijmlaag over het volledige oppervlak helpt om aan te sluiten op de voorkant van de telefoon als een origineel fabriekscomponent. Edge-to-Edge bescherming inclusief afgeronde schermranden Full Glue-technologie met lijmlaag over het volledige oppervlak 2.5D gevormde randen om onbedoeld loskomen te verminderen en stof te helpen blokkeren Breukbestendige coating om te beschermen tegen barsten en afbrokkelen Elegante zwarte rand voor een vloeiende overgang naar de schermranden Strakke, geïntegreerde schermbescherming die de uitstraling van je Xiaomi Redmi Note 15 Pro behoudt.

3x apgo Hydrogel Screen Protector voor Garett Kids Essa 4G, Hydrogel Film, met positioneringslaag eenvoudige installatie De verkoper heeft de garantie dat zijn goederen voldoen aan alle toepasselijke regelgeving en worden alleen aangeboden als ze voldoen aan het Joom-beleid en de EU-regelgeving inzake de veiligheid en conformiteit van goederen

Take care of the protection of your DJI OSMO Action 2 sports camera and equip yourself with the best quality tempered glass set. With 9H hardness and rounded edges, they reliably protect the display and lens of the camera from scratches and other mechanical damage. The glass does not affect the image quality, so you can enjoy sharp images and vivid colors. The glass is resistant to dust ingress, leaving greasy stains and fingerprints.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Place the mounting frame with the glass on the watch screen - the glass will be perfectly centered. Remove the protective film from the top of the glass, then press the glass with your finger in the center of the screen to begin the adhesion process. 4) Remove the mounting frame. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free - without the risk of air bubbles and exposure to dust. The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass. Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone. * Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. INSTALLATION INSTRUCTIONS: 1. Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass. Done! Enjoy a perfectly applied screen protector.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass! Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise. INSTALLATION INSTRUCTION: 1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision. 2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles. 3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it. 4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved. 5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out. 6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass! Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise. INSTALLATION INSTRUCTION: 1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision. 2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles. 3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it. 4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved. 5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out. 6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Place the mounting frame with the glass on the watch screen - the glass will be perfectly centered. Remove the protective film from the top of the glass, then press the glass with your finger in the center of the screen to begin the adhesion process. 4) Remove the mounting frame. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm. The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use. The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean. * Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free - without the risk of air bubbles and exposure to dust. The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass. Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone. * Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. INSTALLATION INSTRUCTIONS: 1. Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass. Done! Enjoy a perfectly applied screen protector.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free - without the risk of air bubbles and exposure to dust. The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass. Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone. * Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. INSTALLATION INSTRUCTIONS: 1. Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass. Done! Enjoy a perfectly applied screen protector.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free - without the risk of air bubbles and exposure to dust. The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass. Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone. * Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. INSTALLATION INSTRUCTIONS: 1. Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass. Done! Enjoy a perfectly applied screen protector.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free - without the risk of air bubbles and exposure to dust. The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass. Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone. * Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself. INSTALLATION INSTRUCTIONS: 1. Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left. 3. Put the frame with the glass already mounted on your phone - it will ensure a precise fit and make application easier. 4. Pull the starter film to start the process of automatically sticking the glass on the screen. 5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface. 6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass. Done! Enjoy a perfectly applied screen protector.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use. The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left. Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage. The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone. INSTALLATION INSTRUCTIONS: 1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation. 2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine. 3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit. 4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.